Top seller
No results were found for the filter!
18" Pmod Cable Kit: 6-pin This kit is a handy accompaniment to your 6-pin Pmod. The extension cable lets you locate your Pmod away from its host board, and the included male gender changer can provide extra connectivity to both system and prototyping boards....
₹ 469.00 *
Pmod CON3: R/C Servo Connectors The Pmod CON3 can be easily used to interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque, such as those used in radio controlled airplanes or cars, as well as some mechatronics...
₹ 569.00 *
Arty Z7-20: APSoC Zynq-7000 Development Board... The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with...
₹ 34,529.00 *
JTAG-HS3 Programming Cable The JTAG-HS3 is the newest member of our family of affordable high-speed Xilinx ® FPGA programming solutions. The HS3 builds on the successful JTAG-HS1 by adding an open-drain buffer to pin 14 allowing for the debugging of Xilinx...
₹ 5,899.00 *
Pmod DA4: Eight 12-bit D/A Outputs The Pmod DA4 is an 8 channel 12-bit Digital-to-Analog Converter run via the Analog Devices AD5628 . By communicating with the device through SPI, users may send different analog values on individual channels or output to all 8 channels...
₹ 2,889.00 *
ZedBoard Zynq-7000 ARM/FPGA SoC Development Board ZedBoard is a low-cost development board for the Xilinx Zynq - 7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux ® , Android ® , Windows ® , or other OS/RTOS based design. Additionally,...
₹ 57,999.00 *
Pmod ISNS20: 20A Current Sensor The Digilent Pmod ISNS20 is a small current sense module with a digital SPI interface. The board combines an Allegro ACS722 Hall Effect current sensor with a 12-bit analog-to-digital converter from Texas Instruments. The Pmod ISNS20 is...
₹ 1,709.00 *
Impedance Analyzer for Analog Discovery The Impedance Analyzer for Analog Discovery was designed with automatically adjusting reference resistors and relays to aid in use of the Impedance Analyzer tool in WaveForms. With the Impedance Analyzer accessory, the Analog Discovery...
₹ 2,529.00 *
Pmod Cable Kit: 2x6-pin and 2x6 Pin to Dual... This kit is a handy accompaniment to your 12-pin Pmod. The extension cables let you locate your Pmod 6" away from its host board, or use your 12-pin Pmod on a system board with only two 6-pin Pmod headers available. We've also included...
₹ 729.00 *
Pmod TC1: K-Type Thermocouple Module with Wire The Digilent Pmod TC1 is a cold-junction thermocouple-to-digital converter module designed for a classic K-Type thermocouple wire. With Maxim Integrated's MAX31855, this module reports the measured temperature in 14-bits with 0.25°C...
₹ 2,799.00 *
Pmod SSD: Seven-segment Display The Pmod SSD is a two-digit seven-segment display. Users can toggle through GPIO signals which digit is currently on at a rate of 50 Hz or greater to achieve persistence-of-vision to give the effect of both digits being lit up...
₹ 749.00 *
Pmod RTCC: Real-time Clock / Calendar The Pmod RTCC is a real-time clock/calendar powered by the Microchip ® MCP79410. Through the I 2 C interface, users may configure up to two alarms that can be triggered at a wide variety of possible times. Note: The Pmod RTCC is also...
₹ 1,549.00 *
12V PowerBRICK Analog 6 Pmod Cable NI Multisim Arty S7-50 Analog Ettus USRP Pmod RTCC Analog MCC Basys 3 Artix-7 Current and Cmod A7-35T Eclypse Z7 Zmod ADC 1410 Arty S7-25T PYNQ-Z1 Python MCC USB-231 OpenScope MZ Cora Z7-10 MCC 172 IEPE Basys MX3 Ettus USRP Ettus USRP B200 Genesys ZU-5EV MS8217 Product image Enclosure Kit Cmod S7 OpenScope MZ Ettus USRP Pmod AD5 Arty A7-100T Analog Cmod S6 Cmod A7-15T Analog Basic I O JTAG-SMT2 JTAG-SMT2-NC Analog Pmod ACL2 Ettus USRP B210 Pmod AQS Pmod NAV 9-axis PowerBRICKS
Viewed