Top seller
No results were found for the filter!
The Pmod CON3 can be easily used to interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque, such as those used in radio controlled airplanes or cars, as well as some mechatronics...
₹ 569.00 *
The Pmod CDC1 is a capacitative sensor that uses the Analog Devices AD7156 . By communicating with the chip via I 2 C, users can set the Pmod for an adaptive capacitance threshold that changes with the environment or set static...
₹ 829.00 *
The Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board. Features: Four momentary pushbuttons Debouncing filters Inverting Schmitt Triggers Small PCB size for flexible designs 1.2“ × 0.8” (3.0 cm × 2.0...
₹ 829.00 *
The Pmod BT2 is a powerful peripheral module employing the Roving Networks ® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for...
₹ 3,449.00 *
The Pmod AMP2 is a low power audio amplifier through the use of the Analog Devices SSM2377 . With digital gain options and a pop-and-click feature, users are able to drive a variety of monophonic outputs by providing a digital or analog...
₹ 1,049.00 *
The Digilent Pmod ALS demonstrates light-to-digital sensing through a single ambient light sensor. Digilent Engineers designed this Pmod around Texas Instrument's ADC081S021 analog-to-digital converter and Vishay Semiconductor's...
₹ 1,349.00 *
The Pmod AD2 is an analog-to-digital converter powered by the Analog Devices AD7991. Users may communicate with the board through I 2 C to configure up to 4 conversion channels at 12 bits of resolution. Features: Up to four 12-bit...
₹ 1,969.00 *
The Digilent Pmod AD1 is a two channel, 12-bit analog-to-digital converter that features Analog Devices AD7476A . With a sampling rate of up to 1 million samples per second, this Pmod is capable of excelling in even the most demanding...
₹ 3,649.00 *
The Pmod HAT Adapter makes it easy to connect Pmods to a Raspberry Pi. It supports plug-and-play functionality, only requiring that the host Raspberry Pi is booted with the Pmod HAT attached. The Pmod HAT has three 2×6 Pmod ports and...
₹ 2,499.00 *
The Pmod ACL2 is a 3-axis MEMS accelerometer powered by the Analog Devices ADXL362 . By communicating with the chip via the SPI protocol, users may receive up to 12 bits of resolution for each axis of acceleration. Additionally, this...
₹ 2,049.00 *
The Digilent Pmod 8LD has eight high-brightness LEDs that are driven by logic level transistors so that each LED can be individually illuminated from a logic high signal. Features: Eight high-brightness green LEDs Uses BJTs for low-power...
₹ 1,199.00 *
The Digilent Pmod LVLSHFT is a digital logic level shifter that uses the Texas Instruments SN47LVC1T45 tranceiver. This module is ideal for users who want to supply logic signals following a 3.3V CMOS standard but have an alternate logic...
₹ 2,199.00 *
Arty S7-25T Pmod ISNS20 20A MCC 134 Basic I O Arty S7-50 FMC-HDMI Dual Pmod RS232 Cmod S6 Enclosure Kit Pmod RS485 Pmod MIC3 MEMS Analog Pmod DPOT 2x6 Pin Pmod Basys 3 Artix-7 Analog Nexys 4 DDR NI Multisim Pmod NIC100 JTAG-HS3 Enclosure Kit Zybo Z7-20 Cmod S7 Analog Zybo Z7-10 with Genesys ZU-5EV SRK Basic Servo Ettus USRP N210 Pmod HYGRO UK Wall Plug Digilent PCB Cmod A7-35T Eclypse Z7 PYNQ Grove Blank Canvas Current and Interposer JTAG-SMT2-NC Ettus USRP Project Starter Ettus USRP B210 uC32 Analog USB104 A7 PYNQ Version Analog
Viewed