Top seller
No results were found for the filter!
Line Sensor Bracket Rugged metal bracket suitable for mounting IR proximity sensors on the base plate to create a line following robot. Mounting holes on 1/2" centers throughout the bracket allow for use in custom applications. Features: Angled bracket...
₹ 919.00 *
SRK Basic: Servo Robot Parts Kit (Does Not... The Digilent Servo Robot Kit (SRK) provides the perfect starting point for those new to robotics, but has the power to be used for advanced designs and applications as well. The SRK includes a rugged steel platform and all the motors,...
₹ 10,229.00 *
Rounded Plate Explansion Kit: Punched Metal... Rugged metal rounded expansion platform expansions for use with the Digilent Robotic Starter Kit (RSK). Useful for increasing the size of the RSK to add additional sensors, hardware or other custom requirements. Features: Extends the...
₹ 919.00 *
JTAG-SMT2: Surface-mount Programming Module The joint test action group (JTAG)-SMT2 is a compact, complete and fully self-contained surface-mount programming module for Xilinx ® field-programmable gate arrays (FPGAs). The module can be accessed directly from all Xilinx tools,...
₹ 5,399.00 *
JTAG-SMT2-NC: Surface-mount Programming Module The JTAG-SMT2-NC has all of the same features as the JTAG-SMT2 , but without a USB connector pre-mounted on the board. This allows users of this programming solution to mount the board anywhere in their own design, as opposed to the...
₹ 4,899.00 *
uC32: Arduino-programmable PIC32... The uC32 is a prototyping platform that adds the performance of the Microchip ® PIC32 microcontroller. The uC32 features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply. The...
₹ 3,499.00 *
Max32: Arduino-programmable PIC32... The Max32 is a prototyping platform that adds the performance of the Microchip ® PIC32 microcontroller. The Max32 features a USB serial port interface for connection to the IDE and can be powered via USB or an external power supply. The...
₹ 5,739.00 *
chipKIT PGM Programmer/Debugger for use with... The chipKIT™ PGM is a simple, low-cost module that supports in-system programming and debugging of applications written for Microchip ® PIC-based microcontroller boards. The chipKIT PGM is designed to work with the MPLAB ® and MPLAB X...
₹ 3,449.00 *
zUNO Clip: Mechanical Mount for Microcontroller... Need to keep your microcontroller board from going anywhere? The zUNO Clips make it a cinch to secure your board right where you want it! Sold as a pair, these clips are made from rugged injection-molded polycarbonate and have been...
₹ 919.00 *
Multi-Touch Display Shield: Smart Display The Multi-Touch Display Shield is a gorgeous 2.8“ touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger...
₹ 6,999.00 *
Cmod MX1: Breadboardable PIC32MX... The Cmod MX1 is a MPIDE compatible board from Digilent. It combines a Microchip ® PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod ports. Digilent's Cmod boards are ideally suited for...
₹ 3,449.00 *
WF32: WiFi Enabled PIC32 Microcontroller Board... The WF32 is a prototyping platform that adds the performance of the Microchip ® PIC32 microcontroller. The WF32 is the first board from Digilent to have a WiFi MRF24 and SD card on the board both with dedicated signals. The WF32 board...
₹ 6,999.00 *
Genesys ZU-5EV Analog Pmod MicroSD Analog Ettus USRP Pmod MAXSONAR Analog Zybo Z7 Analog Analog MCC 134 Cora Z7-07S JTAG-HS3 Enclosure Kit VRM Voltage BNC to Basys 3 Artix-7 NI Multisim Analog Ettus USRP B210 Pmod ACL2 Pmod DA2 Two Pmod SD Ettus USRP N210 Pmod Female Pmod MTDS JTAG-SMT2-NC Pmod DA1 Four Pmod HYGRO Ettus USRP B210 Pmod HB3 Cmod A7-35T Analog Ettus USRP B200 Pmod JSTK2 Pmod MIC3 MEMS Angled Plate IR Range Sensor Ettus USRP Nexys A7 100T Pmod ALS Enclosure Kit Pmod RS485 Pmod RS232 Zmod ADC 1410 Analog
Viewed