USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support USB TO UART/I2C/SPI/JTAG Supports...

Rail-mount TTL To RS232 Galvanic isolated Converter, Full-Duplex Communication, Lightningproof & Anti-Surge, Multi-Isolation Protection, TTL Serial Converter Rail-mount TTL To RS232 (B) Galvanic isolated Serial Port Converter Features at...

RS232/485/422 To CAN Industrial Isolated Converter, Supports Modbus RTU Conversion, Multiple Protection Circuits RS232/485/422 to CAN Industrial isolated converter RS232/485/422 to CAN data conversion, supports Modbus RTU conversion...

USB to RS232/485 Industrial Grade Isolated Converter, Onboard Original FT232RNL Chip, Multiple Protection, Wall-mount and Rail-Mount Support USB TO RS232/485 Industrial Grade Isolated Converter FT232RNL | Stable Transmission | Multiple...

UGV Rover Open-source 6 Wheels 4WD AI Robot, Dual controllers, Flexible and Expandable, All-metal Body, Computer Vision, Comes With Interactive Tutorials, Suitable for Raspberry Pi 4B / Raspberry Pi 5 Beginner Selection Recommendation It...

The D42V110Fx family of synchronous buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 60 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC...

The D42V110Fx family of synchronous buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 60 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC...

The D42V55Fx family of synchronous buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 60 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC...

These Pixhawk baseboards can be used with Pixhawk 6X, 5X, and any flight controller that follow the Pixhawk Bus Standard. Pixhawk Standard Baseboard v2A & V2B Ports can be found here Pixhawk Standard Baseboard v1 Ports Pinout can be...

The VINT Hub is one of the most commonly used Phidgets. Connect up to 6 devices to your computer through a single USB port. Each VINT port can perform one of four roles: Communicate with an intelligent VINT Device Read a 0-5V Voltage or...

The VClamp adapter allows RoboClaw or MCP to be used with switching power supplies. It dissipates the excess regenerative energy through a connected resistor. The regenerated power from a brushed DC motor can cause switching power...

This enclosure kit shields and protects the commercial-grade NI Ettus USRP B200mini board with a custom cast-aluminum clamshell case, increasing the operating temperature range from 0-40°C to -20-60°C. All NI Ettus products sold through...