Top seller
No results were found for the filter!
Digilent Pro MX7: PIC32-based Embedded Systems... The Digilent Pro MX7 is a microcontroller development board based on the Microchip ® PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of peripheral modules (Pmod) , and is...
₹ 9,899.00 *
Angled Plate Expansion Kit: Punched Metal... Rugged metal angled expansion platform expansions for use with the Digilent Robotic Starter Kit (RSK). Useful for increasing the size of the RSK to add additional sensors, hardware or other custom requirements. Features: Extends the size...
₹ 709.00 *
Analog Parts Kit by Analog Devices: Companion... The Analog Parts Kit contains a large selection of components perfect for creating a wide variety of useful circuits and devices. Featuring components from Analog Devices ® , the kit includes transistors, resistors, capacitors, diodes,...
₹ 7,439.00 *
Arty Z7-20 With Zynq SDSoC Voucher: APSoC... The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with...
₹ 25,159.00 *
JTAG-USB Cable The JTAG-USB cable allows you to use your PC to connect to a JTAG scan chain or to access an SPI interface on a board equipped with the appropriate 6-pin header. In this way, you can program devices on Digilent programmable logic boards...
₹ 5,899.00 *
LabVIEW Physical Computing Kit with chipKIT WF32 The LabVIEW Physical Computing Kit includes the 32-bit version of LabVIEW Home and is compatible with Windows 10/8.1/8/7/Vista/XP (32-bit and 64-bit). Not compatible with OS X. LabVIEW is a graphical programming platform used for data...
₹ 8,899.00 *
Pmod STEP: Stepper Motor Driver The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD . Users may wire two pairs of channels in series to drive up to 600 mA of current per channel and can view the current status of a GPIO signal through a...
₹ 1,709.00 *
Arty Z7 Pmod Pack The Arty Z7 Pmod Pack was designed to complement features of the Arty Z7 FPGA board, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Arty Pmod Pack includes the Pmod NAV, Pmod SSR, Pmod...
₹ 6,499.00 *
Pmod RJ45: RJ45 connector (Pair) The Pmod RJ45 connector modules can offer an extended wired connection between two different systems. Shipped as a pair of male and female modules, users can connect the two together with an Ethernet cable to communicate via the Ethernet...
₹ 949.00 *
Pmod ISNS20: 20A Current Sensor The Digilent Pmod ISNS20 is a small current sense module with a digital SPI interface. The board combines an Allegro ACS722 Hall Effect current sensor with a 12-bit analog-to-digital converter from Texas Instruments. The Pmod ISNS20 is...
₹ 1,709.00 *
Pmod TPH: 6-pin Test Point Header The Pmod TPH offers 6 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 6 external test point headers Easily access and test signals passing through Small PCB size for...
₹ 669.00 *
Pmod LED: Four High-brightness LEDs The Pmod LED has four user LEDs that are individually driven through logic-level transistors. Features: 4 high-bright red LEDs Clearly visible logic level indicators Required driving current of Small PCB size for flexible designs 0.8“ ×...
₹ 669.00 *
NI myRIO Stepper Motor Analog Eclypse Z7 Cmod A7-15T Pmod OD1 Open UART Crossover Nexys Video Pmod RS232 JTAG-SMT2-NC Analog Pmod NIC100 Analog Basys 3 Artix-7 Pmod ENC Rotary Nexys 4 DDR HDMI Cable Type Pmod MicroSD Cmod A7-35T Enclosure Kit Basic I O Arty S7-25T Analog Cora Z7-07S Eclypse Z7 MCC 128 Voltage MCC 134 Zybo Z7-20 SMA to Analog Cora Z7-10 ZedBoard XUP USB-JTAG Zybo Z7 NI myRIO Genesys ZU-5EV Pmod ACL 3-axis Basys 3 Pmod Pmod AD5 PYNQ-Z1 Arty A7-100T Pmod AMP2 Audio Pmod NAV 9-axis Zybo Z7 Arty Z7-20 Nexys Video
Viewed