The PYNQ-Z1 board is designed to be used with PYNQ, a new open-source framework that enables embedded programmers to exploit the capabilities of Xilinx Zynq All Programmable SoCs (APSoCs) without having to design programmable logic...

The Pmod R2R is resistor ladder with a R-2R resistor configuration. Users can provide 8-bits of parallel data to the module through GPIO signals. This setup teaches users the basic principles behind a Digital-to-Analog Converter....

The Universal Development Board (UDB) is a microcontroller development board intended for use with a wide variety of PIC microcontrollers from Microchip ® . It was designed to support most 3.3V, PIC microcontrollers in 8-bit, 16-bit, or...

The Digilent Pmod MTDS is a gorgeous 2.8" touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger...

The Pmod HAT Adapter makes it easy to connect Pmods to a Raspberry Pi. It supports plug-and-play functionality, only requiring that the host Raspberry Pi is booted with the Pmod HAT attached. The Pmod HAT has three 2×6 Pmod ports and...

The NetFPGA-1G-CML is a versatile, low cost network hardware development platform featuring a Xilinx ® Kintex ® -7 XC7K325T-1FFG676 FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800...

In this book, Chuck Hellebuyck, author of many entry-level technical books, shows you how to get started with the chipKIT™ Uno32 using very simple example projects. These projects demonstrate the use of digital inputs & outputs, analog...

The Digilent Pro MX7 is a microcontroller development board based on the Microchip ® PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of peripheral modules (Pmod) , and is...

Rugged metal angled expansion platform expansions for use with the Digilent Robotic Starter Kit (RSK). Useful for increasing the size of the RSK to add additional sensors, hardware or other custom requirements. Features: Extends the size...

The Analog Parts Kit contains a large selection of components perfect for creating a wide variety of useful circuits and devices. Featuring components from Analog Devices ® , the kit includes transistors, resistors, capacitors, diodes,...

The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000™ All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with...

The JTAG-USB cable allows you to use your PC to connect to a JTAG scan chain or to access an SPI interface on a board equipped with the appropriate 6-pin header. In this way, you can program devices on Digilent programmable logic boards...