Top seller
No results were found for the filter!
Pmod AQS: Digital Gas Sensor for Air Quality The Digilent Pmod AQS is a digital gas sensor for monitoring indoor air quality at low power. With the AMS CCS811 , you can detect a wide range of Volatile Organic Compounds (VOCs) using the micro-hotplate technology, enabling a highly...
₹ 2,649.00 *
High Current Adapter for NI myRIO With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. (For motor applications, please see the myRIO Motor Adapter Board.) The High Current...
₹ 4,999.00 *
Analog Discovery 2x15 Ribbon Cable This cable is a handy accompaniment to your Analog Discovery or Analog Discovery 2. This ribbon cable allows you to extend all 30 pins on the 2x15 pin male connector to a 2x15 pin female connector. The ribbon cable allows the pins of the...
₹ 1,089.00 *
Heatsink with Clip This heatsink is a great way to ensure that none of your chips overheat, and with its convenient clip and adhesive backing, installation and removal is a breeze. The clip will fit perfectly on the Virtex-5 board, or any chip measuring...
₹ 1,839.00 *
MXP Extender Cable for myRIO This cable is designed to extend reach of the myRIO expansion port (MXP). The MXP extender cable is perfectly suited for mounting expansion boards, such as the Pmod Adapter. Features: 34-pin male and female connectors 8" length (210±10mm)
₹ 569.00 *
myProto Protoboard for NI myDAQ & myRIO The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. The...
₹ 5,999.00 *
Shield Adapter (Uno R3) for NI myRIO With the Shield Adapter for NI myRIO , you can now connect your myRIO to the expansive shield options offered by the Arduino ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino® Uno using...
₹ 2,499.00 *
Motor Adapter for NI myRIO The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors, or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is...
₹ 7,999.00 *
Coax Power Cable Features: 2.1mm female power connector for use with Digilent power supplies Useful for any Digilent product that can accept power from an outside source
₹ 229.00 *
HDMI Cable (Type A to Type D Micro) Features: 40" in length Type A to Type D Micro HDMI cable
₹ 1,489.00 *
Speaker Have you been searching for a speaker with a male auxiliary connector and cable that will allow you to blast all of the sounds that your heart desires? With a bandwidth frequency range of 880Hz to 10KHz, this speaker will work seamlessly...
₹ 1,489.00 *
Embedded Vision Bundle The Embedded Vision Bundle makes a valuable tool for anyone looking develop their own embedded vision products and applications, or to learn more about embedded vision concepts. The bundle includes the Zybo Z7-20 Zynq-7000 ARM/FPGA SoC...
₹ 39,529.00 *
2x6-pin to Dual NI myRIO Max32 Pmod DA4 Eight Cora Z7-07S Pmod DPOT NI Multisim Pmod NAV 9-axis Pmod ACL2 Analog Pmod LS1 Cmod A7-15T Current and Basic I O Pmod TMP3 Basys MX3 Pmod USBUART VRM Voltage Pmod MAXSONAR ZedBoard WF32 WiFi Pmod ESP32 Pmod ISNS20 20A PYNQ-Z1 Pmod NIC100 Getting Started NI myRIO Pmod PS2 Pmod Female JTAG-SMT2-NC Basys 3 Artix-7 JTAG 2x7 Ribbon XUP USB-JTAG OpenScope MZ Analog Pmod OLEDrgb 96 Pmod HYGRO FMC Pcam Pmod AD1 Two Pmod Adapter Cmod A7-35T LabVIEW Pmod ENC Rotary Pmod TMP2 Pmod RF2 IEEE Analog
Viewed