Close filters
 
  •  
from to
 
21 From 29
No results were found for the filter!
12V PowerBRICK: Breadboardable Dual Output USB Power Supplies
12V PowerBRICK: Breadboardable Dual Output USB...
Note: purchase the bundle of all four PowerBRICKs and save! Every circuit needs a power supply, but simple, low cost, portable, and reliable power sources can be hard to come by. The PowerBRICK family provides the solution to all of...
₹ 3,869.00 *
Cmod S6: Breadboardable Spartan-6 FPGA Module
Cmod S6: Breadboardable Spartan-6 FPGA Module
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx ® Spartan ® -6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic...
₹ 7,969.00 *
Pmod AMP3: Stereo Power Amplifier
Pmod AMP3: Stereo Power Amplifier
The Pmod AMP3 uses a 2W Class-D audio power amplifier, the Analog Devices SSM2518 . Users are able to provide stereo audio through either I 2 S or TDM at a variety of sampling frequencies. The I 2 C interface can be used to configure the...
₹ 1,919.00 *
Pmod PMON1: Power Monitor
Pmod PMON1: Power Monitor
The Pmod PMON1 is a power monitoring system that uses the Analog Devices AD5112 and ADM119 . By using I 2 C, users can set a reference voltage on the AD5112 to indicate what qualifies as an overcurrent condition for the ADM119. Once an...
₹ 959.00 *
Pmod Shield: Adapter Board for Uno R3 Standard to Pmod
Pmod Shield: Adapter Board for Uno R3 Standard...
The Pmod Shield is an adapter board from the Uno R3 style shield headers present on many Digilent system boards to Pmod. It provides the additional circuitry and connectors necessary to allow Digilent Pmods to be plugged directly in...
₹ 2,329.00 *
Pmod IOXP: I/O Expansion Module
Pmod IOXP: I/O Expansion Module
The Pmod IOXP is an I/O expansion module powered by the Analog Devices ADP5589. By communicating with the chip through I 2 C, users can take advantage of up to 19 additional I/O pins as well as a keypad matrix decoder. Features:...
₹ 2,129.00 *
Pmod USBUART: USB to UART Interface
Pmod USBUART: USB to UART Interface
The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R . Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. Note: There are two UART signal pin...
₹ 1,439.00 *
Pmod RF2: IEEE 802.15 RF Transceiver
Pmod RF2: IEEE 802.15 RF Transceiver
The Pmod RF2 adds RF communication through the Microchip ® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee ® , MiWi™,...
₹ 1,639.00 *
Pmod TPH2: 12-pin Test Point Header
Pmod TPH2: 12-pin Test Point Header
The Pmod TPH2 offers 12 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 12 external test point headers Easily access and test signals passing through Small PCB size for...
₹ 559.00 *
Pmod OD1: Open Drain Output
Pmod OD1: Open Drain Output
The Pmod OD1 is an open drain FET module using NTHD4508 transistors. Users can then drive high current devices (up to 4.1A) by providing digital logic signals from the host board. Features: Two dual power N-FETs Comfortable drives 3.0 A...
₹ 769.00 *
Pmod SD: Full-sized SD Card Slot
Pmod SD: Full-sized SD Card Slot
The Pmod SD provides a full sized SD card slot that can be accessed through SPI. Features: Full size SD card slot Store and access large amounts of date from your system board No limitation on file system or memory size of SD card used...
₹ 1,249.00 *
Pmod HB5: H-bridge Driver with Feedback Inputs
Pmod HB5: H-bridge Driver with Feedback Inputs
The Pmod HB5 offers a 2A H-bridge circuit to drive small to medium sized DC motors. Two sensor feedback pins are incorporated into the motor connection header and are specifically designed to work with the Digilent motor/gearbox, which...
₹ 1,539.00 *
21 From 29
Viewed