The Pmod OD1 is an open drain FET module using NTHD4508 transistors. Users can then drive high current devices (up to 4.1A) by providing digital logic signals from the host board. Features: Two dual power N-FETs Comfortable drives 3.0 A...

The Pmod SD provides a full sized SD card slot that can be accessed through SPI. Features: Full size SD card slot Store and access large amounts of date from your system board No limitation on file system or memory size of SD card used...

The Pmod HB5 offers a 2A H-bridge circuit to drive small to medium sized DC motors. Two sensor feedback pins are incorporated into the motor connection header and are specifically designed to work with the Digilent motor/gearbox, which...

The Digilent Pmod LS1 allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor used in line-following robots. Features: Infrared light detector with on-board...

The Pmod HB3 is a 2A H-Bridge module. This module includes a separate pin header in addition to the standard 6-pin header to receive any external motor feedback signals. The H-Bridge can be driven through GPIO signals. Features: 2A...

The Digilent Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver . The RS232 module is configured as a data communications equipment (DCE) device. It connects to...

The Pmod OC1 is an open collector BJT module using MMBT3904 transistors. Users can then drive high current devices (up to 200 mA) by providing logic signals from the host board. Features: Four 100mA (200mA max) MMBT3904 transistors Four...

The Cmod board combines a Xilinx ® CoolRunner™-II CPLD, a JTAG programming port, and power supply circuits in a convenient 600-mil, 40-pin DIP package. Cmods are ideally suited for breadboard or other prototype circuit designs where the...

The Analog Discovery signal cable assembly, or flywire, is the same assembly that ships with every Analog Discovery and Analog Discovery 2 we sell. We've heard from our users that it would be nice to be able to leave their Analog...

Features: Provides the option to separate 6 signals using MTE connectors 6-pin connectors are standard 100mil spaced 25mil square connectors Can be used with any Digilent board Ideal for testing and verification

Rugged motor/gearbox set suitable for use with Digilent Robotic Starter Kit, separate parts of the RSK or custom applications. Ships with 2mm screws for attachment to our motor mounts. Features: Motor/gearbox with rugged, heavy duty...

Rugged metal motor mounts suitable for use with the Robotic Starter Kit (RSK), Base Plate Expansion or custom applications. Note: This kit does not include motors! Features: 5 3/8" wide for use with the Robotic Starter Kit (RSK or Base...