The (8 inch)203mm omnidirectional wheel,provides a maximum load capacity of 80kg.Two rolling bearings are embedded in each driven small wheel, which is composed of a polyurethane wheel and an aluminum wheel.The accessories are machined...

Feature Used to control the Dynamixel using the Arduino board. Mounts above the Arduino board and can be used with the OpenCR controller Various shields can be stacked on the Dynamixel Shield Comes with JST type connectors and XL-320...

Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. Dynamixel AX-series are used in ROBOTIS STEM, Premium, and GP. You can...

Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. The DYNAMIXEL XL series adopts new features that allow 360 degrees control...

Features Bolts/Nut for ROBOTIS Premium. When the bolts and nuts in the kit are insufficient, you can purchase this separately. Package Components S1 PHS M2*6 400 S2 PHS M2*8 20 S3 PHS M2*10 20 S4 PHS M2*12 20 S5 PHS M2*16 20 S6 PHS M2*20...

Features U2D2 is a small size USB communication converter that enables to control and to operate the DYNAMIXEL with the PC. It is smaller than the previous model and has mount holes to make it easier to install on robots. It uses the USB...

XM430-W210-T Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. The DYNAMIXEL XH / XM-Series offers a variety of control...

Features Optional frame used for DYNAMIXEL Has high strength due to aluminum material. Package Components FR05-S101K 1 Wrench Bolt WB M2.5x6 8 Nut M2.5 4

Features This LiPo battery is intended for robots. PCM is incorporated to protect the battery from overcharge, discharge, and excessive current. Can be recharged with LBC-010 Battery Charger. Package Components LIPO 11.1V Battery LB-010...

Features 6 x Molex 3P connectors for easy port expansion. Can be used to extend the ports when the no. of 3P communicating ports is insufficient. Power supplying method is the same with Dynamixel and controller as the port is the same....

Features Gear Set for DYNAMIXEL AX-12A. Compounded high strength engineering plastic is used. Can be replaced by customer when existing AX-12A gears were worn out.. This is NOT compatible with AX-12+ or AX-18F, because the gear shape is...

Features Bolt for Dynamixel series. Compatible with the S1~S4 bolts. Compatible with Wrench Bolt WB M2. Package Components Nut M2 400 Caution Using the LOCTITE will help keep the nuts tightly in place.