Top seller
No results were found for the filter!
Features At A Glance RoArm-M1 is a serial robotic arm with 5-DOF in total, including the clamping freedom of the gripper Two control methods in demo: Angle control and Coordinate control Supports Leading-following mode based on ESP-NOW...
₹ 32,999.00 *
Features At A Glance The WAVE ROVER is a full metal body 4WD mobile robot chassis, which features superb off-road crossing ability and shock-absorbing performance, open source all code for secondary development. It supports multiple host...
₹ 9,999.00 *
BLDC Motor with Driver CubeMars AK80-64 KV80 – Upgrade Version NOTE: R-Link (A serial port module that works with AK motors) is not required, but it can help debug AK motors. We recommend R-Link to customers using AK motors for the first...
₹ 94,789.00 *
The AK80-8 planetary gear motor offers reduction ratio of 8:1, enabling it to adapt to various application scenarios and provide a wider range of motion control capabilities for your robots. Additionally, we take pride in our dual...
₹ 54,569.00 *
Easy to control and compact in size Integrated with encoder and driver Professionally applied for exoskeleton use The Cubemars AK60 6V1.1 KV80 Brushless DC Motor w/ Encoder & Driver for Robot is an ultra-light, high-integrated dynamic...
₹ 28,619.00 *
The T-Motor Brushless Motor AK70-10 is a highly integrated and high-torque module. The module weighs only 521 g, thin as 50.2 mm combined with efficiency and dynamic. This motor combines with a planetary gear solution and uses a 10:1...
₹ 47,769.00 *
This is a T-motor CubeMars AK10-9 V2.0 100KV Brushless DC Actuator Robot Joint Motor. Features: Highly Integrated & High Torque Module Reducer and Controller in One Large Torque Applied to Exoskeleton, Quadruped Robotic Dog Easy...
₹ 76,499.00 *
Features * OpenRB-150 Starter Kit is a product consisting of OpenRB-150 and XL330-M288-T. * Batteries, USB Cables, and Power Cables are not included. OpenRB-150 Has the same pinout and form factor as the Arduino MKR, and supports...
₹ 5,499.00 *
Xilinx Kria KR260 Robotics Starter Kit is a development platform based on the Kria K26 SOM and built for robotics and industrial applications. It is complete with high-performance interfaces and native ROS 2 support for ease of...
₹ 40,999.00 *
Features HN11-I101 is the standard idler bearing set for Dynamixel XL 430 series. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented hollow...
₹ 749.00 *
Features The OpenRB-150 is a new open-source Arduino compatible embedded controller. The controller has the same pinout and form factor as the Arduino MKR, and supports programming using the Arduino IDE. It also features 4 dedicated...
₹ 2,899.00 *
OVERVIEW Out-of-the-Box Ready for Robotics and Industrial Application Development OPTIMIZED FOR KRIA K26 SOM 2x 240-pin connectors All SOM I/O available for sensor & network connectivity HIGH PERFORMANCE INDUSTRIAL VISION SLVS-EC Rx 4x...
₹ 40,999.00 *
Robot Actuator ViperX 300 Hinge SPH W TurtleBot4 Bracket-Dual-L WidowX MX-28 U2D2 PHB Power DYNAMIXEL Dynamixel Spindle SI-48 K 60mm Aluminum Robot Cable-4P ROS based Robot SMPS 12V 5A ReactorX 200 Magnetic Sensor ROS2 based ROBOTIS STEM Kria KR260 WAVE ROVER FR05-H101K Set BIOLOID FP04-F2 PhantomX Metal FR07-S101K Set Robot Actuator DYNAMIXEL Wrench Bolt M2 TurtleBot4 WidowX 250 Dynamixel ROBOTIS PLAY BT-410 AK80-6 With ROBOTIS Premium U2D2_INT BT-410 Dongle LIPO Battery DYNAMIXEL XL330-M288-T RUBIK LINK V2.0 OpenRB-150 Robot Actuator Robot Actuator BT-210 Flexible And TURTLEBOT3
Viewed