Top seller
No results were found for the filter!
IQRF 2 click IQRF 2 click carries the DCTR-72DAT RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional...
₹ 5,389.00 *
RN4871 click RN4871 click carries the RN4871 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with...
₹ 3,469.00 *
GNSS 5 click Determine your current position with GNSS 5 click . It carries the NEO-M8N GNSS receiver module from u-blox . GNSS 5 click is designed to run on a 3.3V power supply. The click communicates with the target microcontroller over I2C or UART...
₹ 4,309.00 *
RN4870 click RN4870 click carries the RN4870 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with...
₹ 3,469.00 *
GPS 4 click GPS 4 click carries the L70 compact GPS module from Quectel. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided by...
₹ 3,569.00 *
RN4678 click RN4678 click carries the RN4678 Bluetooth® 4.2 dual mode module from Microchip. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C and UART interface, with additional...
₹ 3,049.00 *
6LoWPAN C click 6LoWPAN C click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following...
₹ 2,729.00 *
4G LTE-E click (Europe) 4G LTE-E click carries the LARA-R211 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with...
₹ 12,079.00 *
ccRF 3 click ccRF 3 click carries the CC1120 high-performance RF transceiver for narrowband systems from Texas Instruments. The clicks will enable you to add a low-power consumption radio transceiver at 433 MHz frequency . ccRF 3 click is designed to...
₹ 3,779.00 *
SPIRIT click SPIRIT click carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality...
₹ 4,099.00 *
GSM/GNSS 2 click GSM/GNSS 2 click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click carries SIM868 quad-band GSM/GPRS module. GSM/GNSS 2 click is designed to run on either 3.3V or 5V power supply. It...
₹ 7,249.00 *
WiFi ESP click WiFi ESP click carries the ESP-WROOM-02 module that integrates ESP8266EX. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface and the following pins on the mikroBUS™...
₹ 1,579.00 *
RS485 Isolator 1-Wire I2C DALI Click 4-20 mA T click RS485 4 Click ETH Click LightRanger 3 ATA663254 click DALI 2 click Ambient 5 click USB UART click RF Meter click Temp Hum 5 RS485 3 click USB UART 3 Oximeter click Temp-Hum 3 iButton click Saml Touch RN4678 click I2C Isolator UART I2C SPI 4-20 mA R click FLICKER click RS485 2 click PS 2 click LLC-I2C Click BroadR-Reach Angle 3 click PAC1921 click RS232 2 click ccRF 3 click Stepper 4 click Buck 3 click I2C Isolator 2 RELAY click RS485 click 5V USB I2C click I2C 1-Wire IQRF 2 click PWM 2 click USB UART 2 PWM driver ECG click Pedometer 3 CAN SPI click
Viewed