I2C Isolator 2 click

Please inform me as soon as the product is available again.

₹ 2,519.00 *

Prices incl. GST

Out of Stock.

Product Code: MIKROE-2609
MPN: MIKROE-2609

I2C Isolator 2 click provides I2C lines and power isolation for slave devices. It carries...more

Close menu

Product information "I2C Isolator 2 click"

I2C Isolator 2 click provides I2C lines and power isolation for slave devices. It carries the ADM3260 dual I2C isolator with an integrated DC-to-DC converter. I2C Isolator 2 click is designed to run on either 3.3V or 5V power supply. The click communicates with the target microcontroller over an I2C interface with additional functionality provided by the PWM pin on the mikroBUS™ line.

ADM3260 features

The ADM3260 is a hot swappable digital and power isolator with two nonlatching, bidirectional communication channels, supporting a complete isolated I2C interface, and an integrated isolated dc-to-dc converter, supporting up to 150 mW of isolated power conversion.

The bidirectional I2C channels eliminate the need for splitting I2C signals into separate transmit and receive signals for use with standalone optocouplers.

How it works

The screw terminal on the board can be connected to I2C and power connections of an I2C slave device.

Specifications

Type	Isolator
Applications	Isolated I2C, SMBus, and PMBus interfaces, multilevel I2C interfaces, central office switching, telecommunication and data communication equipment, etc
On-board modules	ADM3260 dual I2C isolator
Key Features	up to 150 mW output power
Key Benefits	integrated DC-to-DC converter
Interface	GPIO,I2C
Peripherals include	two pars of screw terminals
Input Voltage	5V,5V
Compatibility	mikroBUS
Click board size	M (42.9 x 25.4 mm)

Pinout diagram

This table shows how the pinout on I2C Isolator 2 click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes	Pin					Pin	Notes
	NC	1	AN	PWM	16	PDIS	Power disable
	NC	2	RST	INT	15	NC
	NC	3	CS	TX	14	NC
	NC	4	SCK	RX	13	NC
	NC	5	MISO	SCL	12	SCL	I2C Clock
	NC	6	MOSI	SDA	11	SDA	I2C Data
Power supply	+3.3V	7	3.3V	5V	10	+5V	Power supply
Ground	GND	8	GND	GND	9	GND	Ground

Jumpers and Settings

Designator	Name	Default Position	Default Option	Description
JP1	VIO SEL.	Left	3V3	Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V
JP2	VIO ISO	Left	3V3	Isolated Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V

Buttons and LEDs

Designator	Name	Type	Description
CN1		SCREW TERMINAL	VCC, GND isolated connection.
CN2		SCREW TERMINAL	SCL SDA isolated connection

Programming

Code snippet

The following code snippet is an example of a read sequence using I2C.

1 I2C1_Start();              // issue I2C start signal
2 I2C1_Wr(0xA2);             // send byte via I2C  (device address + W)
3 I2C1_Wr(2);                // send byte (data address)
4 I2C1_Repeated_Start();     // issue I2C signal repeated start
5 I2C1_Wr(0xA3);             // send byte (device address + R)
6 LATB = I2C1_Rd(0);         // Read the data (NO acknowledge)
7 I2C1_Stop();               // issue I2C stop signal

Downloads

mikroBUS™ Standard specification

ADM3260 datasheet

I2C Isolator 2 click schematic