Products from Mikroelektronika

MCU Card is a standardized add-on board, which allows very simple installation and replacement of the microcontroller unit (MCU) on a development board equipped with the MCU Card socket. By introducing the new MCU Card standard, we have...

ON-BOARD PROGRAMMER-DEBUGGER : CODEGRIP USB programmer & debugger : Programming & debugging for more than 270 Microchip's popular 8-bit PIC MCUs, from the smallest PIC MCU devices with only 8 pins to powerful 40-pin ones. CODEGRIP Suite...

Your Strong Ally. mikroBasic PRO for AVR is a full-featured Basic compiler for AVR devices. The feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing number...

Your Strong Ally. mikroPascal PRO for AVR is a full-featured Pascal compiler for AVR devices. The feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing...

Your Strong Ally. mikroC PRO for AVR is a full-featured C compiler for AVR devices. The feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing number of...

Your Strong Ally. mikroPascal PRO for AVR is a full-featured Pascal compiler for AVR devices. The feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing...

Your Strong Ally. mikroBasic PRO for AVR is a full-featured Basic compiler for AVR devices. The feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing number...

Your Strong Ally. mikroC PRO for AVR is a full-featured C compiler for AVR devices. The feature rich environment you can experience today is the result of 15 years of dedicated work and steady progress. The ever-increasing number of...

ATA6563 click carries the ATA6563 high-speed CAN transceiver. The click is designed to run on a 5V power supply. Use the VIO SEL jumper for selecting the 3.3V or 5V logic level. It communicates with the target microcontroller over UART...

DALI is an international standardized protocol for intelligent digital lighting control, that enables an easy implementation of robust, scalable and flexible lighting networks. DALI stands for Digital Addressable Lighting Interface and...

USB I2C click carries an MCP2221 USB-to-UART/I2C converter. The chip supports full-speed USB (12 Mb/s), I2C with up to 400 kHz clock rates and UART baud rates between 300 and 115200. The board communicates with the target MCU through...

MCP2542 is designed specifically for high-speed CAN FD applications with communication speeds of up to 8 Mbps. Longer than usual BUS lengths are supported thanks to the improved maximum propagation delay. The board has a standard RS232...