Top seller
No results were found for the filter!
With the total height of 1.10mm, the BMA456 is well suited for using it in wearable and handheld devices. Its powerful event detection engine is equipped with a set of features suitable for a wearable device, including step detection and...
₹ 1,789.00 *
The I3G4250 IC supports both I2C and SPI interfaces, which allows Gyro 3 click to be interfaced with a wide range of different MCUs. Although it is very sensitive (down to 0.008 dps/LSB) it is very resistant to shock and has a...
₹ 2,629.00 *
The ISM330DLC is produced using well-proven microelectromechanical sensor (MEMS) manufacturing processes, along with the CMOS technologies that allow a high integration scale on a wafer level, providing good component matching and...
₹ 2,209.00 *
Thanks to the used proprietary technologies that allow high precision, reliability, and low power consumption, Ambient 6 click can be used for a rapid development of various cost-effective applications that rely on light intensity...
₹ 949.00 *
The LTR-329ALS-01 offers six programmable gain settings, ranging from 1x up to 96x. This allows operating flexibility, as the sensor can be used in both very bright and very dim environments. Ambient 8 click can be used for a rapid...
₹ 949.00 *
Built with the power consumption in mind, the HDC1080 is an ideal solution for IoT development. A common problem for all humidity sensors is the memory effect or a hysteresis after prolonged exposure to extreme RH values for prolonged...
₹ 1,369.00 *
The VCNL4040 also integrates some additional features for better reliability. It has an intelligent crosstalk cancelation scheme implemented, in order to reduce the crosstalk phenomenon. A smart persistence allows the interrupt engine to...
₹ 949.00 *
Additional features of the AD8232 include HR LED indicator for visual feedback, adaptive high-pass filter for faster recovery, dedicated reference buffer for the virtual ground, and high ESD rating, up to 8kV human body model. All these...
₹ 3,679.00 *
Built to be used as a simple solution, this 9 DOF SiP provides an output which can be used directly, with no tedious conversions required. Acting as a co-processor, it reduces the workload from the host MCU, allowing it to be used for...
₹ 2,729.00 *
Besides the mikroBUS™, some of the pins are also available via the additional header on the Click board™ itself. Featuring very high absolute movement sensing resolution (12 bits over 2.0mm, 488nm), and incremental movement with the...
₹ 2,309.00 *
AnyNet 2G click is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing. This...
₹ 7,249.00 *
IQRF click carries the DCTR-76DA RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional...
₹ 4,519.00 *
LIN Click STM32F4 AudioAmp 3 EnOcean click I2C Isolator 2 Boost-INV 2 GeoMagnetic SPEAKUP 3 CLICK MiWi click SPI Isolator Thermo 6 click 3D Hall 3 Click MiWi 2 click Fan 2 click Gyro 4 Click IrThermo click LTE IoT 2 Click Hall Current 4 Pi 4 Click LED Flash 2 GNSS 5 click Button Y Click Accel 13 Click MRAM click RS485 2 click I2C to SPi MCP25625 click GPS 4 click DC Motor 10 Button Power Altitude 2 Excelon-LP Temp-Hum 4 Tester click Peltier Click Charger 2 click UART I2C SPI Hall Current 3 Intel Joule Stepper 4 click Buck-Boost 2 AnyNet 2G click RTD click UART Mux click GSR click DIGI POT 4
Viewed