Top seller
No results were found for the filter!
Features such a very high accuracy, low power consumption, temperature stability, water resistance, and more, make Altitude 3 click a perfect choice for development of barometric pressure sensing applications for sports activity...
₹ 1,579.00 *
Thanks to the used proprietary technologies that allow high precision, reliability, and low power consumption, Ambient 5 Click can be used for a rapid development of various cost-effective applications that rely on light intensity...
₹ 1,159.00 *
The Click board™ contains the required resistances used to form a voltage divider with the sensor, as well as the accurate SAR type ADC with 12-bit resolution which allows the voltage to be converted, using 5V from the mikroBUS™ rail as...
₹ 3,359.00 *
The MCP9843 IC meets JEDEC specification JC42.4-TSE3000B3 and JC42.4-TSE2002B3, allowing it to be used as a thermal sensor for memory modules. The MCP9843 is designed specifically for DRAM DIMMs (Dual In-line Memory Modules), allowing...
₹ 1,259.00 *
There are many applications that use this kind of switches. It can be used in various consumer electronic devices, such as portable heaters, video games, pinball machines, various kinds of position-activated toys, and similar...
₹ 1,369.00 *
Due to its high precision and flexible alerting possibilities, programmable thresholds, threshold hysteresis that prevents false alerts, and a dedicated programmable alert pin with the user selectable logic status, this Click board™...
₹ 949.00 *
The MPXV7007DP sensor is shaped so two small tubes can be attached to it, simplifying its practical application. This makes this Click board™ an ideal solution for monitoring the pressure in different kinds of HVAC applications, hospital...
₹ 2,839.00 *
DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON! Note : Voltage higher than 50V can be hazardous! The click is to be used by trained personnel only and attention when applying high voltage is strongly adviced. Due to the...
₹ 1,889.00 *
Temp&Hum 10 click can measure the humidity in the range from 0 to 100 %RH and temperature in the range from -30 °C to +100 °C, with the typical accuracy of ±3 %RH and ±0.4 ?. It consumes small amounts of power while in operation,...
₹ 1,679.00 *
Features such as the embedded self-test, support for the hard iron compensation, selectable power mode, 16-bit data output, a wide dynamic range of the measurement (±50 gauss), make this Click board™ a perfect choice for various IoT...
₹ 1,579.00 *
MPR series sensors offer many benefits, making them ideally suited to be used on many different application designs. By featuring the MPRLS0025PA00001A absolute pressure sensor, Pressure 8 click is the perfect tool for development of...
₹ 2,629.00 *
Note: ECG 4 is a development and prototyping tool. It is not intended to be used for medical treatment of patients and other life-critical applications! The BMD101 SoC integrates all the necessary components, so there are very few...
₹ 3,679.00 *
Pi 4 Click LED Driver 3 USB I2C click DALI Click TMR Angle Click RS232 2 click GSR click OBDII click Slider click RS485 4 Click 6LoWPAN T click LTE IoT 2 Click Manometer 2 GPS Click NANO GPS click RS485 3 click DC MOTOR 3 IrDA 3 click Hall Current 4 Tamper 2 click Hall current 2 Heart Rate 7 RTD click Opto Encoder Angle 4 click 3G-AA Click Waveform Click BroadR-Reach RS232 click 13DOF Click M-Bus Master 6DOF IMU click MCP2517FD click PS 2 click IR Sense 2 CapSense click 4G LTE-APJ 4X4 RGB click I2C to SPi Pedometer 3 MCP2518FD click DHT22 2 click CAN Isolator RS232 SPI click I2C 1-Wire MCP16331 click
Viewed