Top seller
No results were found for the filter!
NI myRIO Starter Accessory Kit The NI myRIO Starter Accessory Kit includes everything you need to get started connecting to and programming the I/O of NI myRIO. Kit Contents: Barrel connector with leads Assorted capacitors Diodes 7-segment display Mechanical rotary...
₹ 21,719.00 *
30-Pin Flywire Labels for the Analog Discovery 2 This sticker sheet provides 30 plastic labels for the 30 pins on the Analog Discovery 2 flywires. We've heard from our users that it can be tedious to find the correct wire out of the 30 color-coded flywires each time they need to be...
₹ 279.00 *
Pmod DIP: DIP to 12-pin Pmod Adapter The Digilent Pmod DIP is a 12-pin dual in-line package (DIP) that also includes a 2×6 female Pmod header, allowing users to easily separate and process any signals traveling to and from their 12-pin Pmod. It allows for easy use of...
₹ 619.00 *
Pmod DA1: Four 8-bit D/A Outputs The Pmod DA1 is an 8-bit Digital-to-Analog Converter powered by two Analog Devices AD7303 . With simultaneous dual outputs per single input, users can perform up to four isolated tests on the analog outputs. Users may provide data to the...
₹ 2,119.00 *
Pmod CON4: RCA Audio Jacks The Pmod CON4 allows users to connect their system to two RCA audio jacks. GPIO signals can be transferred in either direction through the audio jacks with jumper blocks to adjust signal routing. Features: 2 RCA audio jacks Receive and...
₹ 559.00 *
Pmod CON1: Wire Terminal Connectors The Pmod CON1 is a small module with six screw terminals to interface with external wires that are not compatible with the DIP standard. Two of the terminals can be used to provide power from an outside source and the other four can be...
₹ 559.00 *
Pmod COLOR: Color Sensor Module The Digilent Pmod COLOR is a color sensor module with the ability to sense red, green, blue and clear light. The onboard AMS's TCS3472 integrates an IR blocking filter to accurately determine the color of objects as well as sense ambient...
₹ 1,499.00 *
Pmod Clip: Mechanical Mount for Pmod boards Useful for securely attaching a Pmod to your project or application. Features: Works with any Pmod 0.80" in width Can also accomodate a Cerebot Nano What's Included: One Pmod clip One 8-32 nut, screw, and washer
₹ 349.00 *
Pmod CAN: CAN 2.0B Controller with Integrated... The Pmod CAN is a CAN 2.0B controller with an integrated transceiver. The embedded Microchip MCP25625 chip connects directly to the physical CAN bus and meets automotive requirements for high-speed (1 Mb/s), low quiescent current,...
₹ 1,799.00 *
Pmod BB: Wire Wrap / Breadboard The Pmod BB provides a ready-made solution for prototyping breadboard circuits. With the 2x6 pin header you can directly apply your digital or analog signals without going through the hassle of extra jumper wires. Features: 266 tie point...
₹ 1,119.00 *
Pmod Adapter for NI roboRIO With the Pmod Adapter for roboRIO, you can now connect your roboRIO to the expansive selection of Pmods offered by Digilent Inc. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the...
₹ 1,929.00 *
Pmod Adapter for NI myRIO With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the SPI, I2C,...
₹ 2,469.00 *
Pmod RF2 IEEE Pmod ISNS20 20A Basic I O 2x6-pin to Dual Pmod ESP32 Pmod DA4 Eight Pmod AD1 Two JTAG-SMT2-NC FMC Pcam PYNQ-Z1 Pmod USBUART Analog Cora Z7-07S Cmod A7-35T Pmod Female Pmod MAXSONAR Pmod TMP3 Pmod HYGRO Pmod TMP2 ZedBoard Pmod ENC Rotary Pmod LS1 Basys 3 Artix-7 Pmod Adapter XUP USB-JTAG VRM Voltage Getting Started LabVIEW Pmod ACL2 Current and Analog NI myRIO Pmod NAV 9-axis NI Multisim NI myRIO Max32 Pmod OLEDrgb 96 JTAG 2x7 Ribbon Pmod PS2 Analog Pmod DPOT Pmod NIC100 OpenScope MZ WF32 WiFi Basys MX3 Cmod A7-15T
Viewed