Top seller
No results were found for the filter!
Accel 2 click carries ST’s LIS3DSH IC, a low-power factory-calibrated three-axis accelerometer which embeds a FIFO buffer and two programmable state machines. It allows you to implement gesture recognition. User-defined programs can...
₹ 1,999.00 *
Ambient click carries the Melexis MLX75305 IC. It’s a CMOS integrated optical sensor that consists of a photodiode, a transimpendance amplifier, and an output transistor. The chip converts ambient light intensity into a voltage, using...
₹ 949.00 *
LightRanger click is a proximity sensor carrying ST’s VL6180X IC. This chip is based on ST’s patented FlightSense technology: the sensor — consisting of an IR emitter, ambient light sensor, and range sensor — calculates distance by...
₹ 2,519.00 *
Thermo 3 click carries TMP102 , a digital temperature sensor IC with a tiny footprint of only 1.6mm x 1.6mm. The click is designed to run on a 3.3V power supply only. It communicates with the target MCU through mikroBUS™ I2C pins (SCL,...
₹ 949.00 *
Pressure 2 click carries MS5803 , a high resolution MEMS pressure sensor that is both precise and robust. Its measurement range is from 0 to 14 bars (with a resolution of up to 0.2 mbars), but because of the stainless steel cap...
₹ 7,249.00 *
IR reflect click carries a GP2S700HCP reflective photointerrupter and an onboard potentiometer. On this type of photointerrupter the infrared emitter and receiver are facing the same direction; the infrared beam from the emitter gets...
₹ 1,259.00 *
Proximity 2 click features MAX44000 , an IC that integrates an ambient light as well as a proximity sensor. The chip consists of an array of photodiodes that convert light into current, which the internal circuitry then converts into a...
₹ 1,999.00 *
THERMO 2 click carries DS1825 , a programmable resolution digital thermometer IC with a unique 64-bit address. The click is designed to run on a 3.3V power supply. The board communicates with the target microcontroller through a 1-wire...
₹ 1,579.00 *
HDC1000 click is a humidity (and temperature) measurement click™ board carrying the HDC1000 sensor from TI. Its chief features are low power consumption, precision, and resistance to dust, dirt, and similar environmental contaminants....
₹ 1,999.00 *
Tilt click carries RPI-1035 , a 4-directional optical tilt sensor. This type of sensor provides positional feedback for left, right, backward or forward movement (tilt). Compared to mechanical solutions, optical direction detectors are...
₹ 1,359.00 *
Flame click is a fire detection solution. It carries a PT334-6B silicon phototransistor that’s covered in black epoxy and therefore sensitive only to infrared light. To use it as a fire alarm, set up the exact detection threshold through...
₹ 1,259.00 *
DHT22 click is a temperature and humidity measurement board carrying the sensor of the same name. It’s a low cost reliable solution that communicates with the target board microcontroller through a single Serial Data Line. The sensor can...
₹ 2,519.00 *
Gyro 2 Click Opto Encoder Air quality Color 6 click SHT1x click Color 3 click Pressure 3 IR Sense 2 ECG 4 Click TMR Angle Click Heart Rate 7 Pedometer 3 Microwave click GSR click DHT22 2 click IR Sense 3 3D Hall 6 Click Temp-Log 5 Vibra sense ECG 3 Click 3D Hall 3 Click Thermo J click Light click 13DOF Click Temp-Log 3 RTD click 6DOF IMU click MOTION click Grid-EYE click MPU IMU click LSM6DSL click Manometer click Slider click Hall current 2 Alcohol click Manometer 2 Hall Current 4 6DOF IMU 11 IrDA 3 click Water Detect Angle 4 click Tilt click UV 4 click Heart Rate 3 ECG 2 click Accel 12 click
Viewed