Top seller
No results were found for the filter!
IR ECLIPSE click IR eclipse click carries an EE-SX198 photo interrupter sensor. This sensor consists of an infrared transmitter and receiver facing each other and spaced apart by a 3mm slit. When the beam from the transmitter is eclipsed by placing an...
₹ 1,579.00 *
Illuminance click Illuminance click carries a TSL2561 light-to-digital converter with a sensor that’s designed to mimic the way humans perceive light. This makes it ideal for applications where ambient lighting conditions have to be measured (backlight...
₹ 1,759.00 *
UNI HALL click Description UNI HALL click is a simple solution for adding an unipolar Hall switch to your design. It carries the Melexis US5881 unipolar Hall-effect switch and a 74LVC1T45 single bit, dual supply translating transceiver. The unipolar...
₹ 1,259.00 *
Bi Hall click Bi Hall click is a simple solution for adding a bipolar Hall switch to your design. It carries the Melexis US2882 bipolar Hall-effect switch and a 74LVC1T45 single bit, dual supply transceiver. A bipolar Hall effect sensor is sensitive...
₹ 1,259.00 *
HTU21D click HTU21D click carries a high-precision, easy-to-use relative humidity sensor with temperature output. It's a great solution for quickly developing reliable environmental sensing nodes. The sensor is plug and play, requiring no calibration...
₹ 2,209.00 *
HYDROGEN click Hydrogen click carries an MQ-8 sensor for hydrogen (H2). The gas sensing layer on the sensor unit is made of tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the levels of hydrogen rise. The...
₹ 1,579.00 *
UV click Design devices that warn you of excesive ultraviolet radiation levels with UV click. This click boards carries the ML8511 IC that is sensitive to UV-A (365-315 nm) and UV-B (315-280 nm) rays. The board can output either analog or digital...
₹ 2,519.00 *
METHANE click Description Methane click carries an MQ-4 sensor for methane (CH4). The gas sensing layer on the sensor unit is made of tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the levels of methane...
₹ 1,579.00 *
MOTION click MOTION click is a motion detector sensitive only to live bodies. It carries PIR500B , a pyroelectric sensor. The click is designed to run on 3.3V power supply only. It communicates with the target MCU over RST and INT pin on the...
₹ 1,369.00 *
Air quality click Air quality click is a simple solution for adding a high sensitivity sensor for detecting a variety of gases that impact air quality in homes and offices. It carries an MQ-135 sensor. The click is designed to run on a 5V power supply. It...
₹ 1,729.00 *
LPG click LPG click carries an MQ-5 sensor for detecting liquefied petroleum gas leakage. The gas sensing layer on the sensor unit is made of Tin dioxide (SnO2), which has lower conductivity in clean air. The conductivity increases as the levels...
₹ 1,579.00 *
LIN HALL click LIN HALL click carries an MLX90242 linear Hall sensor IC (with built-in active error correction circuitry) and an MCP3201 12-bit ADC. It outputs a signal that is proportional to the flux density of a magnetic field—a north magnetic field...
₹ 1,789.00 *
Temp-Hum 3 Alcohol click RF Meter click Ambient 5 click Angle click Temp Hum 6 3D Hall 2 click Thermo 8 click Spectral 3 Temp-Log 3 UV 4 click 6DOF IMU 2 Proximity 7 EMG click Accel 3 click Vacuum click Heart rate 4 Temp Hum 10 3D Hall 3 Click Accel click ECG click Proximity 6 Force click Hall Current 6 Temp Hum 9 UV2 click LightRanger 3 Pedometer 3 Air quality 2 Color 6 click ECG 3 Click Ultrasonic 2 HYDROGEN click THERMO 2 click Accel 11 click Color 7 click Oximeter click Temp Hum 5 Alcohol 2 Click Pressure 6 Magneto 5 click RTD click Spectral 2 Pressure 7 Pressure 8 Temp-Log 6
Viewed