Top seller
No results were found for the filter!
MCP2542 click MCP2542 is designed specifically for high-speed CAN FD applications with communication speeds of up to 8 Mbps. Longer than usual BUS lengths are supported thanks to the improved maximum propagation delay. The board has a standard RS232...
₹ 2,099.00 *
RS485 Isolator click RS485 Isolator click is a RS485 communication isolator, and carries the ADM2682EBRIZ , a 5 kV rms signal and power isolated RS-485 transceiver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the...
₹ 5,149.00 *
CAN Isolator click CAN Isolator click provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter. The click is designed to run on either 3.3V or 5V power supply. CAN...
₹ 4,099.00 *
ATA6563 click ATA6563 click carries the ATA6563 high-speed CAN transceiver. The click is designed to run on a 5V power supply. Use the VIO SEL jumper for selecting the 3.3V or 5V logic level. It communicates with the target microcontroller over UART...
₹ 2,099.00 *
RS485 2 click RS485 2 click carries the MAX3471 half-duplex transceiver intended for lithium battery-powered RS-485/RS-422 applications. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller...
₹ 1,889.00 *
I2C Isolator 2 click I2C Isolator 2 click provides I2C lines and power isolation for slave devices. It carries the ADM3260 dual I2C isolator with an integrated DC-to-DC converter. I2C Isolator 2 click is designed to run on either 3.3V or 5V power supply. The...
₹ 2,519.00 *
USB UART 2 Click USB UART 2 click provides USB isolation and carries the ADUM4160BRWZ USB port isolator. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional...
₹ 4,099.00 *
SPI Isolator click SPI Isolator click carries the ADuM4154 5kV digital isolator optimized for a serial peripheral interface (SPI). The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over SPI...
₹ 3,049.00 *
ATA663211 click The click communicates with the target MCU through the UART interface and runs on a 3.3V power supply. ATA663211 click can aslo be used as a standalone LIN transceiver, without being connected to a mikroBUS™ socket. An onboard LDO...
₹ 1,999.00 *
MCP2003B click MCP2003B click is a mikroBUS™ add-on board with a bi-directional LIN transceiver . It’s a physical interface to automotive and industrial LIN systems, in accordance to the LIN Bus Specifications Revision 2.2, SAE J2602 and ISO 17987....
₹ 1,889.00 *
MCP25625 click Named after the main chip, MCP25625 click also has a RS232 port, which is a standard connector for CAN communications. Additionally, the two CAN wires (CANL and CANH) can also be connected directly through two pins on the right edge of...
₹ 2,519.00 *
Expand 4 click Expand 4 click carries TPCIC6A595 , a chip that combines an 8-bit serial-in, parallel-out shift register with an 8-bit D-type storage register. It’s intended for use as a port expander for connecting high power peripherals. On the output...
₹ 1,569.00 *
ETH WIZ click RS485 4 Click MCP2518FD click LLC-I2C Click BroadR-Reach DALI Click I2C Isolator 2 RS232 2 click USB I2C click MCP2542 click OBDII click ETH Click PS 2 click Expand 4 click 4-20 mA T click CAN SPI click Dual LIN click I2C to SPi RS485 click 5V MCP2517FD click FTDI click UART 1-Wire CAN Isolator I2C 1-Wire RS485 2 click RS232 Isolator 1-Wire I2C RS485 click Fiber Opt click RS485 Isolator CAN FD Click USB SPI click UART I2C SPI USB UART click USB UART 2 ATA6563 click RS232 SPI click RS232 click RS485 3 click Shuttle click LIN Click M-Bus Master iButton click MCP2003B click DALI 2 click RiBUS Click
Viewed