Top seller
LED Flash 2 click LED Flash 2 click
₹ 1,999.00 *
7x10 B click 7x10 B click
₹ 1,579.00 *
7x10 Y click 7x10 Y click
₹ 1,579.00 *
16x12 G click 16x12 G click
₹ 3,149.00 *
UT-M 7-SEG R click UT-M 7-SEG R click
₹ 2,099.00 *
UT-L 7-SEG R click UT-L 7-SEG R click
₹ 2,309.00 *
LED Flash click LED Flash click
₹ 3,569.00 *
7-SEG RGB click 7-SEG RGB click
₹ 3,049.00 *
7x10 G click 7x10 G click
₹ 1,579.00 *
4Dot-Matrix R click 4Dot-Matrix R click
₹ 6,199.00 *
Next LCD mini click Next LCD mini click
₹ 1,999.00 *
BIG 7-SEG R click BIG 7-SEG R click
₹ 1,999.00 *
Close filters
 
  •  
from to
2 From 4
No results were found for the filter!
Matrix RGB click
Matrix RGB click
Matrix RGB click is a mikroBUS™ add-on board powered by a 32-bit FT900 MCU designed specifically for powering 16x32 RGB LED matrices. The board has a 16 wire IDC connector for connecting to a single 16x32 LED panel; however, the firmware...
₹ 2,519.00 *
Led ring R click
Led ring R click
LED ring R click is a mikroBUS™ add-on board with a ring of 32 red LEDs driven by four 8-bit 74HC595 serial-in, parallel-out shift registers. The ring is 25mm in diameter. The click communicates with the target MCU through the mikroBUS™...
₹ 1,679.00 *
7x10 R click
7x10 R click
7x10 R click can be used for displaying letters on display with 7x5 font resolution. It carries a matrix of 70 red LEDs driven by a pair of 8-bit serial-in, parallel-out shift registers, a Darlington Transistor array and a Johnson...
₹ 1,579.00 *
4X4 RGB click
4X4 RGB click
4x4 RGB click carries a matrix of 16 WS2812 RGB LEDs and a MCP1826 low dropout regulator. These LEDs actually consist of three single colored LEDs (Red, Green and Blue), plus a control chip in a single package; various colors can be...
₹ 1,999.00 *
AlphaNum R click
AlphaNum R click
AlphaNum click is a simple solution for adding 14-segment alphanumeric display to your device. The board carries two TLC5926 16-bit Constant-Current LED sink Drivers as well as a dual character red LED 14-segment display (with two...
₹ 1,579.00 *
AlphaNum G click
AlphaNum G click
AlphaNum click is a simple solution for adding 14-segment alphanumeric display to your device. The board carries two TLC5926 16-bit Constant-Current LED sink Drivers as well as a dual character green LED 14-segment display (with two...
₹ 1,579.00 *
OLED C click
OLED C click
OLED C click lets you add a small but bright and crisp color OLED display to your design. It carries the PSP27801 OLED display, the same one that we have used on Hexiwear. The click is designed to run on 3.3V power supply only. It...
₹ 3,049.00 *
OLED W click
OLED W click
OLED W click carries a 96 x 39px white monochrome passive matrix OLED display. The display is bright, has a wide viewing angle and low power consumption. To drive the display, OLED W click features an SSD1306 controller. It's built-in...
₹ 2,519.00 *
OLED B click
OLED B click
OLED B click carries a 96 x 39px blue monochrome passive matrix OLED display. The display is bright, has a wide viewing angle and low power consumption. To drive the display, OLED B click features an SSD1306 controller. It's built-in...
₹ 2,519.00 *
EVE Click
EVE Click
EVE Click is a display controller board in mikroBUS form factor. It features state-of-the-art FT800Q graphics controller which integrates display, audio and touch onto a low cost, easy-to-use, single-chip solution. With 12 embedded...
₹ 4,099.00 *
BarGraph click
BarGraph click
BarGraph Click is a compact and easy solution for adding ten-segment light bar display to your design. It features JSB-R102510Z light bar display as well as two 74HC595 shift registers. The 74HC595 IC contains an 8-bit serial in,...
₹ 1,259.00 *
8x8 B click
8x8 B click
8x8 B Click is an add-on board in mikroBUS form factor. It’s a compact and easy solution for adding 8x8 BLUE LED display matrix to your design. It features MAX7219 8-digit LED display driver module as well as 64 BLUE LED diodes. 8x8 B...
₹ 1,889.00 *
2 From 4
Viewed