Features DYNAMIXEL XW series are ROBOTIS`first line of IP Level models, featuring a certified IP68(1m, 24hr)rating and are designed for use in wet environments, underwater, and any outdoor applications where a sealed servo is necessary....

Features BT-410 is a device that enables serial communication (UART) via Bluetooth communication. BT-410 covers the circuit with a case to protect it, and it uses a connector-type cable to install on a robot and RC-100B. You can control...

Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. The DYNAMIXEL 2XC series can control two axis with a single module, so it...

Features DYNAMIXEL XW series are ROBOTIS`first line of IP Level models, featuring a certified IP68 (1m, 24hr) rating and are designed for use in wet environments, underwater, and any outdoor applications where a sealed servo is...

Features OpenCR1.0 (Open-source Control module for ROS) is an open source robot controller embedded with a powerful MCU from the ARM Cortex-M7 line-up. The hardware, software, schematics, PCB Gerber, BOM, and firmware source codes of the...

Features BT-410 dongle converts two interfaces: USB 2.0 interface and Bluetooth 4.0 Low Energy interface (master function). That is, if you connect BT-410 dongle to the PC, it can be paired with BT-410 Slave module to exchange data (1:1...

Features BT-410 is a device that enables serial communication (UART) via Bluetooth communication. BT-410 has a case that protects the circuits and a connector-type cable that is used to connect the device onto the robot. Used with smart...

Feature Part for ROBOTIS PLAY (12mm) and OLLO J & K Series Package Components Components Quantity 12mm Rivet-Mg(n)) 1 Compatible Products Connects with ROBOTIS PLAY (501,503,600,700) and OLLO J & K Series

Features DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. DYNAMIXEL-P Series implements removable reduction cycloid gears, resulting...

Specification Packages Includes: 1 x T Motor AK80-6 1x Driver Board

Specification Packages Includes: 1 x T Motor AK80-9 1x Driver Board

Features The U2D2 Power Hub Board combines with the U2D2 to supply a variety of external power sources to DYNAMIXELs. The board is capable of supplying power to all DYNAMIXELs with the SMPS port, terminal block, and 2P power connector....