Robotics

Features This motor is used with the controller in the ROBOTIS DREAM can be controlled by controlling the port. By controlling the direction and speed of the rotation, this motor can be used to turn the wheels of a robotic car. Package...

₹ 1,589.00 *

USB Downloader LN-101_INT

Features The LN-101(USB Downloader) is used to download programs from the PC onto a controller. Package Components LN-101 1 Cable 1 Compatible Products Compatible with the following controllers: CM-100, CM-100A, CM-150, CM-200, CM-700,...

₹ 1,999.00 *

S4 Bolt PHS M2x12 (50 pcs)

Features Bolts for AX-series. Package Components Bolt PHS M2x12 50

₹ 259.00 *

S3 Bolt PHS M2x10 (50 pcs)

Features Bolts for AX-series. Package Components Bolt PHS M2x10 50

₹ 259.00 *

S2 Bolt PHS M2x8 (50 pcs)

Features Bolts for AX-series. Package Components Bolt PHS M2x6 50

₹ 259.00 *

S1 Bolt PHS M2x6 (400 pcs)

Features Bolts for AX-series. Package Components Bolt PHS M2x4 400

₹ 529.00 *

RC-100B

Features A remote controller for controlling ROBOTIS Robots. Addition of exclusive connector for installing BT-210. Supports IR, Zigbee, and Bluetooth communications. Unlike other products whose circuits/batteries are exposed, the...

₹ 5,349.00 *

OpenCM9.04-C

Features OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. All Dynamixels can be controlled when using the accessory set of 485 expansion board. Uses USB Cable (Micro-B)...

₹ 2,669.00 *

N1 Nut M2 (400 pcs)

Features Bolt for Dynamixel series. Compatible with the S1~S4 bolts. Compatible with Wrench Bolt WB M2. Package Components Nut M2 400 Caution Using the LOCTITE will help keep the nuts tightly in place.

₹ 459.00 *

MX-106 Gear/Bearing Set

Features Gear set for the DYNAMIXEL MX-106. Made with metal and specially coated to strengthen endurance and durability of abrasion. A MX-106 exclusive magnet is attached to the wheel gear. There are 2 wheel bearings included. Package...

₹ 14,329.00 *

HN12-I101 Set

Features HN12-I101 is the standard idler bearing set for Dynamixel X-series 430 models. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented...

₹ 1,999.00 *

FRP54-A110K Set

Features Optional frame for DYNAMIXEL PRO. . Adaptor for DYNAMIXEL PRO 54-series. Used for housing or output shaft of DYNAMIXEL PRO module. Has high strength due to metal processing, and therefore it does not bend or break easily....

₹ 4,969.00 *