This set of (4 inch) 100mm Mecanum wheels including 4 pieces of wheels so that both side of the robot equip with one right and left wheel. Each wheel is driven independently. Mecanum wheel can be capable of moving in any direction, no...

These high quality universal Aluminum hubs are key-locked and loctited to the motor shaft. They are designed to connect a motor and a wheel. There is a groove of key locked for securing a motor to the hub. Key Features: Material:...

This 100mm heavy duty double aluminum Omni-directional wheel is a robust, durable and double row wheel that provides easy 360 degree movement, with rotational and sideways maneuverability. The Omni wheel is used for robotic, trolleys,...

The WidowX Pan Tilt kit is a mid level pan tilt kit using the wildly popular MX-64 DYNAMIXEL smart servos. With a resolution of 0.088°, rotation range of 360°, stall torque of 74 kg·cm, and speed of 78rpm you get tremendous resolution...

This Interbotix Lab Custom Frame is great for building robots from the -64 and -106 series DYNAMIXEL robot servos. For -106 servos, the frame will fit perfectly onto the servo. Each frame comes with two small spacer and longer bolts for...

Easily link your project to a LiPo/Li-ion battery with the Battery Wiring Harness ! This harness is the same one we use in our Hexapod and Quadruped kits. Just attach the male Dean connector to any of our LiPo/Li-ion Batteries and the...

The BIOLOID Compatible Metal F4 Bracket is a aluminum replacement for the standard BIOLOID F4 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...

The BIOLOID Compatible Metal F4 Bracket is an aluminum replacement for the standard BIOLOID F4 bracket . 12 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...

The BIOLOID Compatible Metal F3 Bracket is an aluminum replacement for the standard BIOLOID F3 bracket . 4 tapped holes on the top of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...

The BIOLOID Compatible Metal F2 Bracket is an aluminum replacement for the standard BIOLOID F2 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. Compatible DYNAMIXEL Servos AX-12A...

The BIOLOID Compatible Metal F1 Bracket is an aluminum replacement for the standard BIOLOID F1 bracket . 4 tapped holes on the sides of the frame make it easy to mount cable holders and 3D frames. This is the same frame as used in the...

The ArbotiX Commander v2.0 is an Arduino compatible, open-source XBEE-wireless hand-held controller built specifically for controlling ArbotiX/NUKE powered walking robots (but it can be interfaced to virtually any microcontroller or PC)....