Products from MGSL

Solid-state system (no rotating components) Can be used in applications such as AGV obstacle avoidance FOV 132*9°, works under 60k lux Accuracy: ≤6cm / Detecting Range: 0.1~4m Optimized obstacle avoidance mode Outputs a single point data...

The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! As with all LiDAR sensors, your effective detection distance will vary depending on...

YDLIDAR F4 360 degree scanning up to 12 meters. YDLIDAR F4 efficiently scans every object within scanning range. Scanning Sample Rage = 6000 times/sec. This product is based on the principle of triangulation distance measurement,...

YDLIDAR G4 LIDAR is a 360-degree two-dimensional laser range scanner (LIDAR). This product is based on the principle of triangulation distance measurement, together with the relevant optical, electrical, algorithm design, to achieve...

Overview : PSoC 4 an ARM based PSoC PSoC 5LP programmer and debugger Power supply system Bluetooth interface Arduino compatible headers Digilent Pmod compatible header PSoC 5LP GPIO header CapSense slider Pioneer board LEDs Push buttons...

Description Do you have some liquids that you need to move? This fluid pump will move 350 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V,motor and a tough thermoplastic body. It’s totally submersible and water-cooled...

uArm Swift Pro uArm Swift series are consumer-level desktop robotic arms which are developed for makers and STEAM educationpurposes. Based on Arduino, uArm Swift series is open-source and DIY friendly. It’s extremely easy to use, almost...

Description The AT&T IoT Starter Kit (2nd Gen.) integrates LTE Cat-4 connectivity, GPS location tracking, User Application Processor plus sensors, into a slim form-factor, System-on-Module IoT solution, suitable for system prototyping as...

Description This is a 0.96 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 6 pin male...

Description These IDC cables mate with our DC3-10P PCB mount connectors and can be used for power and signal routing between two boards. Specifications: Connector Type: 10 Pin (2 x 5) Female to Female IDC Connector Material: Plastic,...

The uArm Geek Kit comes with the uArm Gripper and Vision Kit . It empowers uArm with the vision to load and unload materials, pick and place objects with ease. Based on Arduino, uArm Geek Kit is fully open-source hardware modules for...

The uArm Creative Kit bridges the gap between technology and art! This kit transforms the uArm into an artistic arm with its universal holder, laser head, and 3D printing kit. All of the uArm end-effectors available in this set are...