Products from MGSL
No results were found for the filter!
Heat shrink tube 80mm - 13mm - Blue Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹ 19.00 *
YDLIDAR LIDAR X4 YDLIDAR X4 LIDAR is a 360-degree two-dimensional laser range scanner (LIDAR). This product is based on the principle of triangulation distance measurement, together with the relevant optical, electrical, algorithm design, to achieve...
₹ 10,889.00 *
Heat shrink tube 80mm - 8mm - Red Use heat shrink to reinforce connections, protect devices, and electrically isolate exposed electronics. Generally used to bundle wires and very commonly used to seal electrical joints and prevent wire joints from corrosion & abrasion....
₹ 19.00 *
Door Switch - 3 pin Description power 10A 152 / 250V with one alternating contact terminal 6.3 x 0.8 mm function Pull / Push possibility of manual switch-off
₹ 339.00 *
Color Pigment for Polymorph - 1g - Black Polymorph is an non-toxic, lightweight polyester biodegradable thermoplastic, This hand moldable plastic has a melting temperature of about 136-140°F (58-62°C). It is great for making one-off prototypes, quick attachments and...
₹ 59.00 *
Color Pigment for Polymorph - 1g - Blue Polymorph is an non-toxic, lightweight polyester biodegradable thermoplastic, This hand moldable plastic has a melting temperature of about 136-140°F (58-62°C). It is great for making one-off prototypes, quick attachments and...
₹ 59.00 *
Color Pigment for Polymorph - 1g - Green Polymorph is an non-toxic, lightweight polyester biodegradable thermoplastic, This hand moldable plastic has a melting temperature of about 136-140°F (58-62°C). It is great for making one-off prototypes, quick attachments and...
₹ 59.00 *
Color Pigment for Polymorph - 1g - Red Polymorph is an non-toxic, lightweight polyester biodegradable thermoplastic, This hand moldable plastic has a melting temperature of about 136-140°F (58-62°C). It is great for making one-off prototypes, quick attachments and...
₹ 59.00 *
Color Pigment for Polymorph - 1g - Yellow Polymorph is an non-toxic, lightweight polyester biodegradable thermoplastic, This hand moldable plastic has a melting temperature of about 136-140°F (58-62°C). It is great for making one-off prototypes, quick attachments and...
₹ 59.00 *
LDR Light Sensor Module The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of the signal...
₹ 119.00 *
Uarm Swift Pro Standard Kit The uArm Swift Pro is an open source Arduino based robot arm designed for desktop use. This well engineered solid aluminium robot arm has many applications including laser engraving, painting, writing and even 3D printing. This version...
₹ 1,35,479.00 *
Uarm Swift Pro Professional Kit The uArm Swift Pro professional edition is an open source Arduino based robot arm designed for desktop use. This well engineered solid aluminium robot arm has many applications including laser engraving, painting, writing and even 3D...
₹ 1,37,699.00 *
LED SMD RGB ODROID-H4 PLUS NVIDIA Jetson Opto 3 click High Power ReSpeaker Core Clicker 2 for Pololu Simple LoCoBot WX250 TurtleBot4 Power Pack for Ambient 3 Click Pimoroni pHAT Ammonia NH3 Gas I2C Shield for Crazyflie 2.1 Ultrasound 5.65inch ACeP Slider 2 Click Propeller Guard Carbon Dioxide XL330-M288-T OpenRB-150 Soil oxygen 6DOF IMU 4 ST-LINK V2 mini Hydrogen Solid State RS485 click Ultraviolet RS232 485 422 BLE TX Click Temp Hum 9 Flash 2 click Arduino Due - AT 55A AT 12A UNI-DS V8 Air quality SiK Telemetry Electret Industrial 3G SARA click NVIDIA Jetson Buck 10 Click STEM drone
Viewed