Top seller
No results were found for the filter!
Determine your current position with GNSS 5 click . It carries the NEO-M8N GNSS receiver module from u-blox . GNSS 5 click is designed to run on a 3.3V power supply. The click communicates with the target microcontroller over I2C or UART...
₹ 4,309.00 *
RN4870 click carries the RN4870 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with...
₹ 3,469.00 *
GPS 4 click carries the L70 compact GPS module from Quectel. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided by...
₹ 3,569.00 *
RN4678 click carries the RN4678 Bluetooth® 4.2 dual mode module from Microchip. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C and UART interface, with additional...
₹ 3,049.00 *
6LoWPAN C click carries the CC2520 2.4GHz RF transceiver. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following...
₹ 2,729.00 *
4G LTE-E click carries the LARA-R211 multi-mode cellular module from u-blox. The board is designed to use 5V power supply. I/O voltage levels could be 3.3V or 5V. It communicates with the target microcontroller over UART interface, with...
₹ 12,079.00 *
ccRF 3 click carries the CC1120 high-performance RF transceiver for narrowband systems from Texas Instruments. The clicks will enable you to add a low-power consumption radio transceiver at 433 MHz frequency . ccRF 3 click is designed to...
₹ 3,779.00 *
SPIRIT click carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality...
₹ 4,099.00 *
GSM/GNSS 2 click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click carries SIM868 quad-band GSM/GPRS module. GSM/GNSS 2 click is designed to run on either 3.3V or 5V power supply. It...
₹ 7,249.00 *
WiFi ESP click carries the ESP-WROOM-02 module that integrates ESP8266EX. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface and the following pins on the mikroBUS™...
₹ 1,579.00 *
GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with...
₹ 8,299.00 *
GNSS 4 click carries SAM-M8Q patch antenna module from u-blox. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C or UART interface. What is GNSS? GNSS stands for Global...
₹ 4,619.00 *
GNSS ZOE Click 3G-AA Click GSM GNSS 2 MiWi 2 click BT Audio click 6LoWPAN C click OOK RX click WiFi 5 click EnOcean 3 Click NFC click NFC Extend nRF C click 4G LTE-E click EnOcean click GNSS click GNSS2 click ccRF 3 click LTE IoT click GNSS 4 click 4G LTE-APJ 3G-EA Click Eu LoRa 3 click DeviceDrive CC3100 click M-BUS RF click IR click RN4870 click LoRa 5 click IR Beacon Click 4G LTE-NA click BLE 4 Click BLE 7 click LoRa 4 click BLE 3 click EnOcean 4 Click RN4871 click GSM Click 6LoWPAN T click NFC Tag 4 Click GSM3 click LoRa click NANO GPS click GPS Click MiWi click RFid click GSM2 click
Viewed