Top seller
No results were found for the filter!
MPU 9DOF Click WiFi3 click is a complete self-contained WiFi solution carrying the ESP8266 module with a system on a chip. The click is designed to run on a 3.3V power supply only. It communicates with the target board microcontroller through the...
₹ 2,649.00 *
NFC Tag 2 click NFC Tag 2 click carries the NT3H1101 NTAG I2C energy harvesting NFC Forum Type 2 Tag from NXP. The click is designed to run on a 3.3V power supply only. It communicates with the target MCU over I2C interface and the INT pin (field...
₹ 1,259.00 *
LTE IoT 2 Click Two SMA connectors on board for the main and the secondary (GNSS) antennas, network and status indicators, familiar 3GPP standard AT commands set, as well as the Quectel enhanced AT commands over the UART interface, USB connector for...
₹ 7,249.00 *
WiFi 7 click WiFi 7 click carries the ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI...
₹ 3,049.00 *
3G-EA Click (Eu And Australia) 3G-EA click is a versatile cellular network communication solution, featuring the compact 3G UMTS/HSPA Quectel UG95 module . This module features a full set of options for the cellular networking and communication, such as the network...
₹ 9,349.00 *
3G-AA Click (United States) 3G click (for USA) is a mikroBUS™ add-on board with Quectel’s UG95 3G UMTS/HSPA module . The board has a rich set of components to simplify development: an SMA connector, earphone/microphone jack, MicroUSB port, as well as a SIM card...
₹ 9,349.00 *
BLE 3 click Built-in RTC saves additional energy One of the standout features of the NINA-B1 module is its real time counter functionality. This counter can be used to generate precisely timed BLE advertising events (broadcasting packets to every...
₹ 4,289.00 *
LoRa click LoRa click carries Microchip’s RN2483 fully certified LoRa Sub-GHz, 433/868 MHz European R&TTE Directive Assessed Radio Modem. The click is designed to use either a 3.3V or a 5V power supply. It communicates with the target...
₹ 5,669.00 *
AnyNet 2G click AnyNet 2G click is a cellular to AWS gateway device, which provides developers with the complete solution for various IoT applications, by using the AWS IoT and Cloud Storage services for the data storage, analyzing and processing. This...
₹ 7,249.00 *
IQRF click IQRF click carries the DCTR-76DA RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional...
₹ 4,519.00 *
IQRF 2 click IQRF 2 click carries the DCTR-72DAT RF transceiver, operating in the 868/916 MHz frequency. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI or UART interface, with additional...
₹ 5,389.00 *
RN4871 click RN4871 click carries the RN4871 Bluetooth® 4.2 low energy module from Microchip. The click is designed to run on a 3.3V power supply. It uses ASCII Command Interface over UART for communication with target microcontroller, with...
₹ 3,469.00 *
3G-EA Click Eu GSM3 click GNSS click 3G-AA Click 6LoWPAN C click M-BUS RF click nRF C click GSM2 click LoRa 4 click NFC Extend GNSS 4 click MiWi click OOK RX click GNSS2 click WiFly click nRF T click NFC click EnOcean 2 click GPS3 click BT Audio click ccRF 3 click NANO GPS click 6LoWPAN T click nRF S click RN4678 click IR click EnOcean 3 Click 4G LTE-APJ EnOcean 4 Click GNSS 7 click MiWi 2 click OOK TX click GNSS ZOE Click Thingstream LoRa 5 click GSM-GPS click GPS 4 click WiFi2 click GSM GNSS click LoRa click LTE IoT 2 Click DeviceDrive ccRF click RFid click BEE click LoRa 3 click
Viewed