Top seller
No results were found for the filter!
DALI 2 click DALI is an international standardized protocol for intelligent digital lighting control, that enables an easy implementation of robust, scalable and flexible lighting networks. DALI stands for Digital Addressable Lighting Interface and...
₹ 3,739.00 *
USB I2C click USB I2C click carries an MCP2221 USB-to-UART/I2C converter. The chip supports full-speed USB (12 Mb/s), I2C with up to 400 kHz clock rates and UART baud rates between 300 and 115200. The board communicates with the target MCU through...
₹ 2,119.00 *
MCP2542 click MCP2542 is designed specifically for high-speed CAN FD applications with communication speeds of up to 8 Mbps. Longer than usual BUS lengths are supported thanks to the improved maximum propagation delay. The board has a standard RS232...
₹ 2,989.00 *
RS485 Isolator click RS485 Isolator click is a RS485 communication isolator, and carries the ADM2682EBRIZ , a 5 kV rms signal and power isolated RS-485 transceiver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the...
₹ 5,149.00 *
CAN Isolator click CAN Isolator click provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter. The click is designed to run on either 3.3V or 5V power supply. CAN...
₹ 5,859.00 *
RS485 2 click RS485 2 click carries the MAX3471 half-duplex transceiver intended for lithium battery-powered RS-485/RS-422 applications. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller...
₹ 2,739.00 *
I2C Isolator 2 click I2C Isolator 2 click provides I2C lines and power isolation for slave devices. It carries the ADM3260 dual I2C isolator with an integrated DC-to-DC converter. I2C Isolator 2 click is designed to run on either 3.3V or 5V power supply. The...
₹ 2,519.00 *
USB UART 2 Click USB UART 2 click provides USB isolation and carries the ADUM4160BRWZ USB port isolator. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional...
₹ 5,859.00 *
SPI Isolator click SPI Isolator click carries the ADuM4154 5kV digital isolator optimized for a serial peripheral interface (SPI). The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over SPI...
₹ 4,359.00 *
ATA663211 click The click communicates with the target MCU through the UART interface and runs on a 3.3V power supply. ATA663211 click can aslo be used as a standalone LIN transceiver, without being connected to a mikroBUS™ socket. An onboard LDO...
₹ 2,869.00 *
MCP2003B click MCP2003B click is a mikroBUS™ add-on board with a bi-directional LIN transceiver . It’s a physical interface to automotive and industrial LIN systems, in accordance to the LIN Bus Specifications Revision 2.2, SAE J2602 and ISO 17987....
₹ 2,739.00 *
MCP25625 click Named after the main chip, MCP25625 click also has a RS232 port, which is a standard connector for CAN communications. Additionally, the two CAN wires (CANL and CANH) can also be connected directly through two pins on the right edge of...
₹ 3,609.00 *
Intel Joule RS232 Isolator Fiber Opt click SPI Isolator EXPAND click Ambient 15 Arduino MKR ETH Click LPCXpresso 4-20 mA T click MCP2518FD click RS485 click 5V Pi 3 click MCP2517FD click mikroBus Cape I2C Isolator 2 CAN Isolator LLC-I2C Click LLC SPI Click CAN SPI click PICtail Plus USB UART 4 RS485 Isolator MCP25625 click I2C 1-Wire RS485 click PS 2 click 1-Wire I2C FRDM KL46 click BroadR-Reach GNSS 10 Click UART 1-Wire STM32F4 Pi 4 Click FTDI click Feather Click ATA6563 click RS232 2 click CAN SPI click PWM 2 click USB UART click Pressure 17 ETH WIZ click I2C Isolator STM32F3 PWM click
Viewed