Top seller
No results were found for the filter!
LTE Cat.1-EU click is a Click board™ based on Thales Cinterion® ELS61 wireless module that delivers highly efficient Cat 1 LTE connectivity for M2M IoT solutions offering seamless fall back to 2G and 3G networks. The best in class...
₹ 11,029.00 *
Determine your current position with GNSS 7 click. It carries the NEO-M9N GNSS receiver module from u-blox. Thanks to u-blox’s advanced algorithms and complete GNSS solution, the GNSS 7 click meets even the most stringent requirements in...
₹ 4,099.00 *
GSR click bundle contains the following: GSR click ECG/EMG cable GSR Electrode Galvanic Skin Response (GSR) measures changes in sweat gland activity on the skin as an indication of physiological or psychological arousal. GSR Click is a...
₹ 5,999.00 *
The M-Bus Master is a Click board™ is complete solution for a master node in M-Bus networks. The M-Bus ("Meter-Bus") is a new European standard for remote reading of heat meters and it is also usable for all other types of consumption...
₹ 1,579.00 *
The Feather is Adafruit’s standardized open source development platform for IoT projects. The Adafruit Feather & FeatherWing system consist of base board (Feather) and expansion boards (Wings). They are connected to each other over...
₹ 1,999.00 *
The Dual LIN click is a Click board™ based on the TLE7268SKXUMA1, a Dual LIN transceiver from Infineon. Given the features included in this transceiver, the Dual LIN transceiver designed for data transmission rates up to 20 kbps being...
₹ 1,259.00 *
This Click board™ is optimized for driving brushed DC motors. it integrates an efficient H-Bridge with very low ON resistance of approximately 0.8Ω through each branch. Furthermore the build-in features like Over- and...
₹ 1,789.00 *
STSPIN233 click is a complete solution for a 3-phase integrated motor driver, based on the STSPIN233, Low voltage 3-phase integrated motor driver. It is optimized for battery-powered, low voltage motor driving applications, featuring the...
₹ 1,789.00 *
The BLE 7 click is a Click board™ witch provide BT/BLE connectivity for any embedded application. BLE 7 click based on the BGX13S22GA-V31, a SiP module from Silicon Labs with a buit-in antenna. Click board™ an ultra-small,...
₹ 2,209.00 *
The UART Mux click is a Click board™ that switches the UART pins (RX and TX) from the mikroBUS™ to one of the four available outputs. It employs the SN74LV4052A, a Dual 4-Channel Multiplexer and Demultiplexer from Texas Instruments. It...
₹ 739.00 *
The 6DOF IMU 11 click is a Click board™ based on the KMX63, a 6 Degrees-of-Freedom inertial sensor system on a single, silicon chip, which is designed to strike a balance between current consumption and noise performance with excellent...
₹ 2,209.00 *
The Heart Rate 9 click is a Click board™ which features PIC16F1779 8-bit MCU and SFH 7060 heart rate and pulse oximetry monitoring sensor. This click has an algorithm for processing data from the sensor and it can send data for 3...
₹ 1,999.00 *
LIN Click STM32F4 AudioAmp 3 EnOcean click I2C Isolator 2 Boost-INV 2 GeoMagnetic SPEAKUP 3 CLICK MiWi click SPI Isolator Thermo 6 click 3D Hall 3 Click MiWi 2 click Fan 2 click Gyro 4 Click IrThermo click LTE IoT 2 Click Hall Current 4 Pi 4 Click LED Flash 2 GNSS 5 click Button Y Click Accel 13 Click MRAM click RS485 2 click I2C to SPi MCP25625 click GPS 4 click DC Motor 10 Button Power Altitude 2 Excelon-LP Temp-Hum 4 Tester click Peltier Click Charger 2 click UART I2C SPI Hall Current 3 Intel Joule Stepper 4 click Buck-Boost 2 AnyNet 2G click RTD click UART Mux click GSR click DIGI POT 4
Viewed