Top seller
No results were found for the filter!
Charger 5 click Charger 5 click is designed to charge Lithium-Ion and Lithium-Polymer batteries. Besides the overvoltage and undervoltage protection, reverse discharge and overtemperature protection, automatic recharge and end of charge safety timer,...
₹ 1,679.00 *
Buck-Boost 2 click Buck-Boost 2 click is an advanced DC-DC step-down/step-up regulator (buck/boost), which is able to provide regulated 5V on its output, regardless of the input voltage. The input voltage can range from 2.7V up to 40V. The click board™...
₹ 2,839.00 *
Buck 8 click Buck 8 click is a high efficiency, wide voltage range, and high current synchronous step down (buck) DC-DC converter, featuring two enhanced modes that can be used to drive lighter loads with increased efficiency. The output voltage can...
₹ 2,729.00 *
MIC33153 click MIC33153 click is a DC-DC adjustable step-down (buck) converter that is designed to deliver a substantial amount of current to very demanding loads, with the voltage output up to 3.5V. The ultra-fast transient response and the ripple...
₹ 2,209.00 *
BATT-MAN click BATT-MAN click is a very versatile battery operated power manager. When powered via mikroBUS™, it will charge the connected Li-Ion/Li-Po 3.7V battery, while providing the output voltage on all its outputs at the same time. The...
₹ 2,839.00 *
Buck 2 click Buck 2 click is a powerful step down DC-DC switching regulator. It gives a high precision regulated voltage at its output and it can handle an ample amount of current. Buck 2 click is highly configurable - the output voltage, maximum...
₹ 2,729.00 *
LED Driver 3 click LED Driver 3 click is an RGB LED driver, capable of driving RGB LEDs with up to 30mA per segment, via the digital I2C interface. It comes with an RGB LED onboard, and is capable of displaying a palette of 32768 colors. It features an...
₹ 1,579.00 *
Buck 3 click Buck 3 click is a very advanced synchronous step-down (buck) converter, which is designed to deliver noise and ripple-free voltage to highly sensitive applications, such as FPGA and high-performance DSP platforms. The onboard step-down...
₹ 2,309.00 *
Smart Buck click The external power supply should be connected to the VIN terminal, with the voltage between 2.5 and 5.5V. Smart Buck click provides two independent output voltage channels, each with the ability to output a regulated voltage in the range...
₹ 3,049.00 *
Boost-INV click High integration rate of the Boost-INV click allows it to use a low number of external components. Advanced switching control of the LTC3582 allows very high efficiency and reduced EMI for using it in audio, or similar EMI sensitive...
₹ 2,209.00 *
Buck 5 click This Click board™ is very useful for the development of applications that require programmed reduction of a wide input voltage range, so it can be used to power low voltage digital ICs. Features, such as the low dissipation due to high...
₹ 3,049.00 *
UPS click UPS click is a supercapacitor charger click that provides continuous power for a load connected to the output terminals. It also provides a temporary backup power supply in cases when the main power supply is abruptly disconnected -...
₹ 2,629.00 *
BroadR-Reach RN4678 click ccRF 3 click RS485 4 Click PIC clicker LightRanger 3 I2C Isolator 2 Saml Touch iButton click ETH Click PAC1921 click USB UART click RS485 3 click RS485 click 5V PWM driver CAN SPI click ECG click Pedometer 3 EasyMx PRO v7 I2C Isolator EasyPIC PRO v7 RS485 Isolator IQRF 2 click RS232 2 click RELAY click PIXI click ATA663254 click 4-20 mA T click UART I2C SPI 4-20 mA R click 1-Wire I2C Easy8051 v6 FLICKER click Stepper 4 click RS485 2 click USB UART 3 Buck 3 click USB UART 2 mikroPascal PRO BIGdsPIC6 PWM 2 click USB I2C click LLC-I2C Click MCP2517FD click Ambient 5 click Temp-Hum 3
Viewed