Top seller
No results were found for the filter!
GSM/GNSS click GSM/GNSS click combines GPS/GLONASS location tracking with GSM module capability for mobile communication. The click features Quectel’s MC60 quad-band module. GSM/GNSS click runs on either 3.3V or 5V power supply and communicates with...
₹ 8,299.00 *
GNSS 4 click GNSS 4 click carries SAM-M8Q patch antenna module from u-blox. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over I2C or UART interface. What is GNSS? GNSS stands for Global...
₹ 4,619.00 *
EnOcean 2 click EnOcean 2 click carries the TCM 515Z transceiver, based on the 2.4 GHz IEEE 802.15.4 radio standard. The click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over UART interface. This...
₹ 4,099.00 *
GSM 4 click GSM 4 click is a mikroBUS™ add-on board that features the u-blox SARA-G3 series 2.5G GSM/GPRS cellular quad-band module. The SARA-G3 module has a miniature LGA (Land Grid Array) form factor as well as an RF transceiver and a power...
₹ 5,149.00 *
BT Audio click Bluetooth class 2 radio and DSP processor combined Microchip’s RN52 Bluetooth audio module delivers high quality audio in small form factor (26.0 mm x 13.5 mm x 2.7 mm). The module combines a class 2 Bluetooth radio and an embedded DSP...
₹ 5,149.00 *
NFC click NFC click is a mikroBUS™ add-on board with a versatile near field communications controller from NXP — the PN7120 IC . NFC devices are used in contactless payment systems, electronic ticketing, smartcards, but also in retail and...
₹ 3,569.00 *
CC3100 click This WiFi click board carries the successor of the highly popular CC3000 module from Texas Instruments. Its claim to fame was that it simplified WiFi for embedded developers by integrating multiple Internet Protocols and a Wifi driver...
₹ 5,149.00 *
3G SARA click Fully functional 3G transceiver To start using 3G SARA click you will need a SIM card and an SMA antenna (sold separately), plus a mic/earphone headset if you want to send and receive calls. Everything else is already on the board. Apart...
₹ 10,399.00 *
WiFi 6 Click WiFi 6 click features Bleugiga’s WF121-A self-contained WiFi module. With a fully integrated radio and 32-bit microcontroller, this module is ideal for embedded applications. WiFi 6 click is designed to run on a 3.3V power supply. It...
₹ 7,249.00 *
M-BUS RF click The module has specified serial data rates of up to 115.2 Kbps and radio data rates of 2.4, 4.8 and 19.2 kbps. For security, the wireless signal has AES and NRZ encryption. Output power is from 125 mW to 631 mV (28dBm). According to the...
₹ 5,669.00 *
GSM-GPS click The high-performance GSM/GPRS engine works on GSM, EGSM, DSC and PCS frequencies. The GPS has a 1 second TTF (Time To First Fix) from a hot start and 30 seconds from a cold start. Tracking sensitivity is -165 dBm. The board has two...
₹ 8,929.00 *
LoRa 2 Click LoRa 2 click carries Microchip’s RN2903 915 MHz Radio Modem compliant with regulations for use in the United States , Canada , Australia and New Zealand . The click is designed to use either a 3.3V or a 5V power supply. It communicates...
₹ 5,669.00 *
Buck-Boost 3 BLE 5 Click USB UART 4 EasyPIC v7 for GainAMP 2 click CAN Isolator USB UART 2 BarGraph 2 16x12 G click iButton click Charger 5 click 8x8 Y click EasyMx PRO v7 Fiber Opt click Saml Touch Expand 2 click RS485 click 5V Easy8051 v6 Hall Current 4 PI2 click DIGI POT 3 NFC Extend UART 1-Wire MUX click RS485 2 click I2C Isolator 2 DIGI POT 5 RS485 Isolator Expand 4 click UART I2C SPI LLC-I2C Click PS 2 click Opto 2 click EasyPIC PRO v7 Boost-INV 2 SPI Isolator ATA6563 click PWM click Power Reset ATA6570 click OBDII click DALI 2 click Button Y Click TFT Developer StereoAmp click 1-Wire I2C
Viewed