Ethernet Connector Boards include a 10/100 Base-Transformer RJ45 connector that enables you to easily connect your prototype board to the Ethernet network. Ethernet Connector Board is a simple, yet effective solution for adding reliable...

Flash 2 click features a 64 Mbit Flash memory IC, manufactured by using the proprietary high-performance CMOS Super-Flash® technology, which allows the Flash 2 click to withstand up to 100,000 write cycles, with the data retention period...

GeoMagnetic click is a digital magnetometric click board which can measure the geomagnetic field in three perpendicular axes. The onboard sensor uses FlipCore - a proprietary technology from Bosch, which results with a carefully tuned...

GSM Booster is a pin-compatible replacement for Telit GM862-QUAD module while retaining the same form factor of this popular module. GSM Booster contains Telit’s new GL865-QUAD GSM module, MMCX GSM antenna connector, SIM card holder,...

H-Bridge 2 click can be used to drive a motor by utilizing a specific configuration of the output stage MOSFETs, known as the H-bridge. This configuration enables H-Bridge 2 click to drive a motor with up to 1.2A and 15V, providing...

H-Bridge click is a high-efficiency dual H-bridge driver Click board™, capable of providing reasonably high current while driving the connected load with up to 7V. Since the used driver IC has two full H-bridge channels, this Click...

Hall Switch click is a magnetic field activated dual-relay Click board™. Hall Switch click has two high-quality relays, which are activated by the Hall-effect sensor: when the north pole magnetic field is introduced to the sensor, one of...

IR Sense 2 click is the infrared sensor Click board™, designed to be used in the short range IR sensing applications. Unlike other pyroelectric sensors, it is able to sense environmental heat changes up to 1m, even through the glass. IR...

IrDA 3 click is an intelligent IR transceiver device that can both send and receive UART commands via the IR interface. IrDA 3 click features both the IR transceiver and the encoder/decoder IC, used to convert the UART data and send or...

LED Driver 4 click is a form of a high-efficiency boost converter that is ideally suited for driving an array of white LEDs. The driver has the ability to dim the connected LED array, without producing any noise on the output. The Click...

Li-Polymer Battery 3.7V 190mAh Li-Polymer Battery is the best solution for adding an autonomous and stable power supply to your devices that require mobility and long-lasting energy source. With its 3.7 voltage, 190 mAH capacity and 4.5g...

LoRa 3 click is a LoRa technology based SRD transceiver, which operates at a sub-gigahertz frequency of 868MHz. Thanks to the spread spectrum modulation feature, as well as the low power consumption, it is capable of achieving a...