Top seller
No results were found for the filter!
Pmod CON4: RCA Audio Jacks The Pmod CON4 allows users to connect their system to two RCA audio jacks. GPIO signals can be transferred in either direction through the audio jacks with jumper blocks to adjust signal routing. Features: 2 RCA audio jacks Receive and...
₹ 559.00 *
Pmod CON1: Wire Terminal Connectors The Pmod CON1 is a small module with six screw terminals to interface with external wires that are not compatible with the DIP standard. Two of the terminals can be used to provide power from an outside source and the other four can be...
₹ 559.00 *
Pmod COLOR: Color Sensor Module The Digilent Pmod COLOR is a color sensor module with the ability to sense red, green, blue and clear light. The onboard AMS's TCS3472 integrates an IR blocking filter to accurately determine the color of objects as well as sense ambient...
₹ 1,499.00 *
Pmod Clip: Mechanical Mount for Pmod boards Useful for securely attaching a Pmod to your project or application. Features: Works with any Pmod 0.80" in width Can also accomodate a Cerebot Nano What's Included: One Pmod clip One 8-32 nut, screw, and washer
₹ 349.00 *
Pmod CAN: CAN 2.0B Controller with Integrated... The Pmod CAN is a CAN 2.0B controller with an integrated transceiver. The embedded Microchip MCP25625 chip connects directly to the physical CAN bus and meets automotive requirements for high-speed (1 Mb/s), low quiescent current,...
₹ 1,799.00 *
Pmod BB: Wire Wrap / Breadboard The Pmod BB provides a ready-made solution for prototyping breadboard circuits. With the 2x6 pin header you can directly apply your digital or analog signals without going through the hassle of extra jumper wires. Features: 266 tie point...
₹ 1,119.00 *
Pmod Adapter for NI roboRIO With the Pmod Adapter for roboRIO, you can now connect your roboRIO to the expansive selection of Pmods offered by Digilent Inc. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the...
₹ 1,929.00 *
Pmod Adapter for NI myRIO With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the SPI, I2C,...
₹ 2,469.00 *
Pmod ACL: 3-axis Accelerometer The Pmod ACL is a 3-axis digital accelerometer module that provides input to a system board. Communication via SPI or I 2 C with the on-board Analog Devices ADXL345 allows the user to access up to 13 bits of acceleration data, indicating...
₹ 1,439.00 *
Arty Pmod Pack The Arty Pmod Pack was designed to complement features of the Arty FPGA board, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Arty Pmod Pack includes the Pmod ACL, Pmod ALS, Pmod AMP2,...
₹ 9,879.00 *
2x6-pin to Dual 6-pin Pmod Splitter Cable Features: Designed for use with Digilent Peripheral Modules that have 2x6 pin connectors Designed to connect two 6-pin system board connectors to a 12-pin Pmod connector, or to connect a 12-pin system board connector to two 6-pin Pmod...
₹ 469.00 *
2x6 Pin Pmod Cable Features: Designed to connect a 12-pin Pmod to a 12-pin system board connector Can be used to send Digilent System board signals to and from outside devices Uses standard 100mil-spaced 25mil square connectors 6" (15cm) in length
₹ 469.00 *
Pmod RF2 IEEE Pmod CON3 R C Pmod LS1 Pmod 8LD Eight Pmod OD1 Open Pmod Adapter Pmod KYPD Pmod ACL2 Pmod DIP DIP to 18 Pmod Cable Pmod GYRO 2x6-pin to Dual Pmod CMPS2 Pmod ACL 3-axis Pmod BB Wire Pmod TPH2 Pmod HB5 Pmod PMON1 Pmod MicroSD Pmod CLS Pmod ENC Rotary Pmod RS485 Pmod DHB1 Dual Pmod TC1 K-Type Pmod AMP2 Audio Pmod MIC3 MEMS SMA to Pmod SF3 32 MB Pmod RJ45 RJ45 Pmod NAV 9-axis Pmod DA4 Eight Pmod DA3 One Digilent PCB Pmod GPS GPS Pmod AMP3 Pmod Female Pmod OLED 128 x Pmod AQS Pmod SSD Pmod DA1 Four Pmod HAT Pmod TPH 6-pin Pmod AD5 Pmod BT2 Pmod VGA Video UART Crossover
Viewed