The Pmod DA1 is an 8-bit Digital-to-Analog Converter powered by two Analog Devices AD7303 . With simultaneous dual outputs per single input, users can perform up to four isolated tests on the analog outputs. Users may provide data to the...

The Pmod CON4 allows users to connect their system to two RCA audio jacks. GPIO signals can be transferred in either direction through the audio jacks with jumper blocks to adjust signal routing. Features: 2 RCA audio jacks Receive and...

The Pmod CON1 is a small module with six screw terminals to interface with external wires that are not compatible with the DIP standard. Two of the terminals can be used to provide power from an outside source and the other four can be...

The Digilent Pmod COLOR is a color sensor module with the ability to sense red, green, blue and clear light. The onboard AMS's TCS3472 integrates an IR blocking filter to accurately determine the color of objects as well as sense ambient...

Useful for securely attaching a Pmod to your project or application. Features: Works with any Pmod 0.80" in width Can also accomodate a Cerebot Nano What's Included: One Pmod clip One 8-32 nut, screw, and washer

The Pmod CAN is a CAN 2.0B controller with an integrated transceiver. The embedded Microchip MCP25625 chip connects directly to the physical CAN bus and meets automotive requirements for high-speed (1 Mb/s), low quiescent current,...

The Pmod BB provides a ready-made solution for prototyping breadboard circuits. With the 2x6 pin header you can directly apply your digital or analog signals without going through the hassle of extra jumper wires. Features: 266 tie point...

With the Pmod Adapter for roboRIO, you can now connect your roboRIO to the expansive selection of Pmods offered by Digilent Inc. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the...

With the Pmod Adapter for myRIO, you can now connect your myRIO to the expansive selection of Pmods offered by Digilent. With this product, users can increase the functionality of their LabVIEW projects by easily accessing the SPI, I2C,...

The Pmod ACL is a 3-axis digital accelerometer module that provides input to a system board. Communication via SPI or I 2 C with the on-board Analog Devices ADXL345 allows the user to access up to 13 bits of acceleration data, indicating...

The Nexys Video Pmod Pack was designed to complement features of the Nexys Video , allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Nexys Video Pmod Pack includes the Pmod JSTK2, Pmod KYPD,...

The Nexys 4 DDR Pmod Pack was designed to complement features of the Nexys 4 DDR, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Nexys 4 DDR Pmod Pack includes the Pmod TC1, Pmod OLEDrgb,...