Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
 
593 From 634
No results were found for the filter!
Digilent Pro MX7: PIC32-based Embedded Systems Trainer Board
Digilent Pro MX7: PIC32-based Embedded Systems...
The Digilent Pro MX7 is a microcontroller development board based on the Microchip ® PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of peripheral modules (Pmod) , and is...
₹ 9,899.00 *
Angled Plate Expansion Kit: Punched Metal Expansion Plate for Digilent Robot Kits
Angled Plate Expansion Kit: Punched Metal...
Rugged metal angled expansion platform expansions for use with the Digilent Robotic Starter Kit (RSK). Useful for increasing the size of the RSK to add additional sensors, hardware or other custom requirements. Features: Extends the size...
₹ 709.00 *
Analog Parts Kit by Analog Devices: Companion Parts Kit for the Analog Discovery
Analog Parts Kit by Analog Devices: Companion...
The Analog Parts Kit contains a large selection of components perfect for creating a wide variety of useful circuits and devices. Featuring components from Analog Devices ® , the kit includes transistors, resistors, capacitors, diodes,...
₹ 7,439.00 *
Gravity: Lightning Sensor
Gravity: Lightning Distance Sensor
INTRODUCTION Gravity: Lightning Sensor employs AMS innovative AS3935 Franklin lightning sensor IC and Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius of 40km both indoors or...
₹ 2,169.00 *
Gravity: Analog Current to Voltage Converter(for 4~20mA Application)
Gravity: Analog Current to Voltage...
INTRODUCTION This current-to-voltage module can linearly convert 0~25mA current signals into 0~3V voltage signals. Industrial sensors or devices usually have the current signal output of 4~20 mA. With this current-to-voltage module, your...
₹ 489.00 *
Gravity: Analog High Temperature Sensor
Gravity: Analog High Temperature Sensor
INTRODUCTION What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure...
₹ 1,379.00 *
SIM808 GSM/GPRS/GPS Arduino IOT Board
SIM808 GSM/GPRS/GPS IoT Board (Arduino Leonardo...
INTRODUCTION This is an Arduino Leonardo with SIM808 GSM/GPRS/GPS. The SIM808 with Leonardo mainboard is the latest Arduino board developed by DFRobot for multi-purpose applications. The onboard SIM808 module includes an integrated...
₹ 7,429.00 *
Devastator Tank Mobile Robot Platform
Devastator Tank Mobile Robot Platform
INTRODUCTION DF Robot proudly presents Devastator Tank Mobile Platform, our newest robot track platform. It is fully compatible with most popular controllers in the market such as Arduino, Raspberry Pi and so on. The Devastator uses high...
₹ 6,919.00 *
Solar Lipo Charger (3.7V)
Solar Lipo Charger (3.7V)
INTRODUCTION This Solar LiPo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the connection is simple and...
₹ 489.00 *
Gravity: I2C DS1307 RTC Module
Gravity: I2C DS1307 RTC Module
INTRODUCTION After several months of "Out of Stock", DS1307 RTC module has experienced a huge upgrade. It comes with a Gravity IIC interface.Its size is also reduced to fit miniaturization application. Gravity I2C DS1307 RTC module is a...
₹ 439.00 *
NFC Module for Arduino
NFC Module for Arduino
INTRODUCTION Near Field Communications (NFC) is a set of short-range wireless technologies, typically requiring a distance of 10cm or less, for two devices such as smartphones or the similar things very close to each other to establish...
₹ 1,579.00 *
XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible)
XBoard V2 -A Bridge Between Home And Internet...
INTRODUCTION This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino...
₹ 1,979.00 *
593 From 634
Viewed