Products from Digilent

The Pmod RF2 adds RF communication through the Microchip ® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee ® , MiWi™,...

The Pmod TPH2 offers 12 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 12 external test point headers Easily access and test signals passing through Small PCB size for...

The Pmod OD1 is an open drain FET module using NTHD4508 transistors. Users can then drive high current devices (up to 4.1A) by providing digital logic signals from the host board. Features: Two dual power N-FETs Comfortable drives 3.0 A...

The Pmod HB5 offers a 2A H-bridge circuit to drive small to medium sized DC motors. Two sensor feedback pins are incorporated into the motor connection header and are specifically designed to work with the Digilent motor/gearbox, which...

The Pmod HB3 is a 2A H-Bridge module. This module includes a separate pin header in addition to the standard 6-pin header to receive any external motor feedback signals. The H-Bridge can be driven through GPIO signals. Features: 2A...

The Digilent Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver . The RS232 module is configured as a data communications equipment (DCE) device. It connects to...

The Pmod OC1 is an open collector BJT module using MMBT3904 transistors. Users can then drive high current devices (up to 200 mA) by providing logic signals from the host board. Features: Four 100mA (200mA max) MMBT3904 transistors Four...

The Cmod board combines a Xilinx ® CoolRunner™-II CPLD, a JTAG programming port, and power supply circuits in a convenient 600-mil, 40-pin DIP package. Cmods are ideally suited for breadboard or other prototype circuit designs where the...

The Analog Discovery signal cable assembly, or flywire, is the same assembly that ships with every Analog Discovery and Analog Discovery 2 we sell. We've heard from our users that it would be nice to be able to leave their Analog...

Features: Provides the option to separate 6 signals using MTE connectors 6-pin connectors are standard 100mil spaced 25mil square connectors Can be used with any Digilent board Ideal for testing and verification

Rugged motor/gearbox set suitable for use with Digilent Robotic Starter Kit, separate parts of the RSK or custom applications. Ships with 2mm screws for attachment to our motor mounts. Features: Motor/gearbox with rugged, heavy duty...

Rugged metal motor mounts suitable for use with the Robotic Starter Kit (RSK), Base Plate Expansion or custom applications. Note: This kit does not include motors! Features: 5 3/8" wide for use with the Robotic Starter Kit (RSK or Base...