Products from Digilent

Start building a wide variety of useful circuits and devices from the large selection of parts and components included in the Analog Parts Kit. With the Analog Discovery 2 USB oscilloscope, you'll be able to measure, visualize, generate,...

The 2x6 Digital Discovery signal cable assembly, or flywire, is the same assembly that ships with every Digital Discovery we sell. The 2X6 flywire features two VCCIO_USR wires (red), two GND wires (black), and eight signal wires...

The 2x16 Digital Discovery signal cable assembly, or flywire, is the same assembly that ships with every Digital Discovery we sell. This assembly features a 2x16 keyed female pin connector for the DIN_USR connector, with 24 DIN signals...

The High Speed Logic Probes come in a pack of four twisted cables. Each cable has a GND (black) wire twisted to a DIN_USR (colored) wire. The wire connects to the High Speed Adapter via a 2-pin female header, and two 1-pin female...

This accessory kit includes everything you need to get started with the PYNQ-Z1 board! Products can also be purchased individually. What's Included: Micro USB cable Ethernet cable microSD card pre-loaded with PYNQ-Z1 boot image 12V, 3A...

Clear, sleek covers made out of plexiglass specifically designed to protect your PYNQ-Z1 . The covers are easily attached to the PYNQ-Z1 using the four included stand-offs along with eight screws, protecting the top and bottom of the...

The Zybo Pmod Pack was designed to complement features of the Zybo Zynq-7000 FPGA, allowing users to expand project possibilities by utilizing a variety of peripheral modules! The Zybo Pmod Pack includes the Pmod BT2, Pmod ALS, Pmod...

Features: Angled headers for Pmod and breadboard connectivity Changes a 6-pin female header to a male header Provides easy access for test and measurement Ships in a pack of 5

Features: Angled headers for Pmod and breadboard connectivity Provides easy access for test and measurement Ships in a pack of 5

This is identical to the standard SD card that we sell, but is pre-loaded with the PYNQ-Z1 boot image. If you have a microSD Card, you can flash your own Boot Image by downloading the PYNQ Boot Image file, which is available on the...

This kit contains an SDSoC voucher that is only for use with the Zybo. Includes Xilinx ® SDSoC Zynq Development Voucher, USB cable, 5V power supply, 8GB microSD card. Designs using embedded linux may consume more power than sourced from...

The chipKIT™ Starter Kit provides a wide range of sensors, actuators, and electronic components at a remarkably low cost, enabling the construction of an endless array of projects that can serve to inform beginners or empower experts....