Products from Robotis

Click on Software link below to download the RoboPlus Design software to see the 3D assembly manual.

Features This is the RS-485 communication 4P cable set for Dynamixel X-series. New style JST connector is applied on one side of the cable while old style Molex connector is applied on the other side. This cable is used when connecting...

Features 5P cable set for connecting sensor/motor. Used to connect sensors to the GP I / O port of the controller. Easy to use for those who want to attach a sensor to a big robot. Package Contents 5P Cable 400mm 4 Compatible Products...

Features This is the communication 4P cable for DX/RX/EX-Series, MX-Series, PRO-Series, RS-485. Flexible sheath resists against breaking and peeling of the cable. High pull out force of the connector maintains stable connection. The...

Features Used for 3P-5P conversion Used to connect sensors to the GP I / O port of the controller. Package Components 3P-5P Cable 150mm 5 Compatible Products Controller : CM-510, CM-530, CM-700 Sensor : Gyro Sensor GS-12, DMS Sensor DMS-80

Features 2 way 2 pin cable used for Battery Box ABB-020. Can be used for replacement if the cable included in the battery box is damaged. Package Components 2P Cable 150mm for battery box 4 Compatible Products Controller : CM-100,...

Features 2 way 2 pin cable used for the Geared Motor. Can be used for replacement if the cable included in the Geared Motor is damaged. Package Components 2P Cable 150mm for Geared Motor 4 Compatible Products Controller : CM-100,...

Features Connector Set used for OpenCM9.04-A. Users can solder the desired part on the controller. Package Components 1x20 PIN Header Socket(Pitch 2.54mm) 2 1x20 BOX Header Socket(Pitch 2.54mm) 2 2x5 PIN Header Socket(Pitch 2mm) 2 1x4...

Features This gear set is for Dynamixel MX-28. Made with metal and specially coated to strengthen endurance and durability of abrasion. A MX-28 exclusive magnet is attached to the wheel gear. There are 2 wheel bearings included. Package...

Features HN12-N101 is the standard horn set for Dynamixel X-series 430 models. This horn set can be assembled on the output shaft wheel gear of Dynamixel X in order to assemble with frames such as a hinge or an adapter. Package...

Features Idler set for RX-24F/28/MX-28. Has high strength due to metal ball bearing. Package Components HN07-i101 1 BEARING MF106ZZ 1 RX28 CAP BEARING 1 Wrench Bolt WB M2.5x8 1 Wrench Bolt WB M2x3 10 Compatible Products Compatible with...

Features * MX-12W is specifically made for Wheels DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Reduction Gearhead + Controller + Driver + Network in one DC servo module. MX-series is a new concept of...