Top seller
XL330-M288-T XL330-M288-T
₹ 2,999.00 *
Dynamixel MX-106R Robot Actuator Dynamixel MX-106R Robot Actuator
₹ 62,779.00 * ₹ 67,359.00 *
DYNAMIXEL MX-64T DYNAMIXEL MX-64T
₹ 37,659.00 * ₹ 40,409.00 *
DYNAMIXEL MX-106T DYNAMIXEL MX-106T
₹ 61,729.00 * ₹ 66,239.00 *
AX-12A Gear Set AX-12A Gear Set
₹ 919.00 *
AX-18A Gear Set AX-18A Gear Set
₹ 1,329.00 *
DYNAMIXEL AX-12A DYNAMIXEL AX-12A
₹ 5,599.00 *
DYNAMIXEL AX-18A DYNAMIXEL AX-18A
₹ 12,339.00 *
Close filters
 
  •  
  •  
  •  
from to
18 From 26
No results were found for the filter!
S2 Bolt PHS M2x8 (50 pcs)
S2 Bolt PHS M2x8 (50 pcs)
Features Bolts for AX-series. Package Components Bolt PHS M2x6 50
₹ 259.00 *
S1 Bolt PHS M2x6 (400 pcs)
S1 Bolt PHS M2x6 (400 pcs)
Features Bolts for AX-series. Package Components Bolt PHS M2x4 400
₹ 529.00 *
RC-100B
RC-100B
Features A remote controller for controlling ROBOTIS Robots. Addition of exclusive connector for installing BT-210. Supports IR, Zigbee, and Bluetooth communications. Unlike other products whose circuits/batteries are exposed, the...
₹ 5,349.00 *
OpenCM9.04-C
OpenCM9.04-C
Features OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. All Dynamixels can be controlled when using the accessory set of 485 expansion board. Uses USB Cable (Micro-B)...
₹ 2,669.00 *
N1 Nut M2 (400 pcs)
N1 Nut M2 (400 pcs)
Features Bolt for Dynamixel series. Compatible with the S1~S4 bolts. Compatible with Wrench Bolt WB M2. Package Components Nut M2 400 Caution Using the LOCTITE will help keep the nuts tightly in place.
₹ 459.00 *
MX-106 Gear/Bearing Set
MX-106 Gear/Bearing Set
Features Gear set for the DYNAMIXEL MX-106. Made with metal and specially coated to strengthen endurance and durability of abrasion. A MX-106 exclusive magnet is attached to the wheel gear. There are 2 wheel bearings included. Package...
₹ 14,329.00 *
HN12-I101 Set
HN12-I101 Set
Features HN12-I101 is the standard idler bearing set for Dynamixel X-series 430 models. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented...
₹ 1,999.00 *
FRP54-A110K Set
FRP54-A110K Set
Features Optional frame for DYNAMIXEL PRO. . Adaptor for DYNAMIXEL PRO 54-series. Used for housing or output shaft of DYNAMIXEL PRO module. Has high strength due to metal processing, and therefore it does not bend or break easily....
₹ 4,969.00 *
FRP42-A110K Set
FRP42-A110K Set
Features Optional adaptor frame for DYNAMIXEL PRO 42-Series. Used for housing or output shaft of DYNAMIXEL PRO modules. Has high strength due to metal processing, and therefore it does not bend or break easily. Package Components...
₹ 4,699.00 *
FR12-S102K Set
FR12-S102K Set
Features Frame for DYNAMIXEL X-series 430 models. Can be used by assembling on the side of the actuator Package Components FR12-S102K 1 Bolt FHS M2.5x14 4 Wrench Bolt WB M2x3 10 Wrench Bolt M2.5x4 8 Spacer Ring 10 Compatible Products...
₹ 2,129.00 *
FR12-H101K Set
FR12-H101K Set
Features Hinge Frame for DYNAMIXEL X-series 430 models. Package Components FR12-H101K 1 HN12-I101 Set 1 Bolt FHS M2.5x14 4 Wrench Bolt WB M2x3 10 Wrench Bolt M2.5x4 8 Spacer Ring 10 * Hinge frame and Idler Bearing set are included....
₹ 4,559.00 *
FR07-G101GM Set
FR07-G101GM Set
Features Gripper frame for DARwIn-OP, RX-10/24F/28, and MX-28. Can be applied on a Humanoid Robot, Manipulator, etc. in order to grip objects. Includes Bearing (HN07-I101 Set) and Screws so that it can be assembled with DYNAMIXEL. Has...
₹ 14,739.00 *
18 From 26
Viewed