Top seller
No results were found for the filter!
RC-100B Features A remote controller for controlling ROBOTIS Robots. Addition of exclusive connector for installing BT-210. Supports IR, Zigbee, and Bluetooth communications. Unlike other products whose circuits/batteries are exposed, the...
₹ 5,349.00 *
OpenCM9.04-C Features OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3. All hardware and software are disclosed. All Dynamixels can be controlled when using the accessory set of 485 expansion board. Uses USB Cable (Micro-B)...
₹ 2,669.00 *
N1 Nut M2 (400 pcs) Features Bolt for Dynamixel series. Compatible with the S1~S4 bolts. Compatible with Wrench Bolt WB M2. Package Components Nut M2 400 Caution Using the LOCTITE will help keep the nuts tightly in place.
₹ 459.00 *
MX-106 Gear/Bearing Set Features Gear set for the DYNAMIXEL MX-106. Made with metal and specially coated to strengthen endurance and durability of abrasion. A MX-106 exclusive magnet is attached to the wheel gear. There are 2 wheel bearings included. Package...
₹ 14,329.00 *
HN12-I101 Set Features HN12-I101 is the standard idler bearing set for Dynamixel X-series 430 models. This idler bearing is connected to the opposite side of the output shaft of Dynamixel X, and can be used to assemble the hinge frame on it. Patented...
₹ 1,999.00 *
FRP54-A110K Set Features Optional frame for DYNAMIXEL PRO. . Adaptor for DYNAMIXEL PRO 54-series. Used for housing or output shaft of DYNAMIXEL PRO module. Has high strength due to metal processing, and therefore it does not bend or break easily....
₹ 4,969.00 *
FRP42-A110K Set Features Optional adaptor frame for DYNAMIXEL PRO 42-Series. Used for housing or output shaft of DYNAMIXEL PRO modules. Has high strength due to metal processing, and therefore it does not bend or break easily. Package Components...
₹ 4,699.00 *
FR12-S102K Set Features Frame for DYNAMIXEL X-series 430 models. Can be used by assembling on the side of the actuator Package Components FR12-S102K 1 Bolt FHS M2.5x14 4 Wrench Bolt WB M2x3 10 Wrench Bolt M2.5x4 8 Spacer Ring 10 Compatible Products...
₹ 2,129.00 *
FR12-H101K Set Features Hinge Frame for DYNAMIXEL X-series 430 models. Package Components FR12-H101K 1 HN12-I101 Set 1 Bolt FHS M2.5x14 4 Wrench Bolt WB M2x3 10 Wrench Bolt M2.5x4 8 Spacer Ring 10 * Hinge frame and Idler Bearing set are included....
₹ 4,559.00 *
FR07-G101GM Set Features Gripper frame for DARwIn-OP, RX-10/24F/28, and MX-28. Can be applied on a Humanoid Robot, Manipulator, etc. in order to grip objects. Includes Bearing (HN07-I101 Set) and Screws so that it can be assembled with DYNAMIXEL. Has...
₹ 14,739.00 *
FR04-G101GM Set Features Grippers for AX series Same grippers as the ROBOTIS GP Package Components Description Qty Frame FR04-E170_GM (Gunmetal) 1 FR04-E171_GM (Gunmetal) 1 Bearing Washer 4 Busher 2 Screw Bolt PHS M2*6 20 Bolt PHS M3*10 2 Nut M2 10...
₹ 8,339.00 *
BIOLOID FP04-F9 5pcs Features Dynamixel AX series exclusive frames. Usually used as a subsidiary frame when connecting F11 frame High strength of engineering plastic Can be affixed tightly using bolts and nuts Grooved for tidy wiring and nut fastening Not...
₹ 529.00 *
Robot Cable-2P TurtleBot4 DYNAMIXEL Plate SPI-1b11 ROBOTIS STEM DYNAMIXEL Gyro Sensor DYNAMIXEL TurtleBot4 RM-X52-TNM DYNAMIXEL DYNAMIXEL PRO Robot Cable-4P Dynamixel DYNAMIXEL OpenCM9.04-A OpenRB-150 OpenRB-150 DYNAMIXEL DYNAMIXEL DYNAMIXEL PRO DYNAMIXEL Pro DYNAMIXEL AX-12A Gear Set DYNAMIXEL DYNAMIXEL OLLO Inventor TURTLEBOT3 U2D2 Power Hub BIOLOID FP04-F3 Joint-S OpenCR1.0 Joint-P FR12-S101K Set ZIG2Serial Tool STL FPX330-H101 ROBOTIS Premium Zumi Robot Cable-3P U2D2 PHB Power Pulley-Cross-S DYNAMIXEL Robot Cable-3P DYNAMIXEL U2D2_INT
Viewed