Products from Phidgets

The Touch Wheel Phidget uses capacitive touch technology, similar to the touchscreen on a smartphone. Capacitive touch sensors such as this can detect a touch through a piece of glass or plastic of up to 3mm thick, so you can hide this...

The Touch Keypad Phidget works like a smartphone's touchscreen, sensing the change in capacitance as your finger comes near. You can place the Touch Keypad Phidget behind up to 3mm of glass or plastic, allowing you to enclose the...

This DC Voltage sensor measures DC voltage up to 200V. Powered by an external 12VDC power supply, the DC Voltage Sensor provides a 0 to 5VDC analog signal that is linearly proportional to the voltage measured at the terminal blocks. The...

This touch wheel recognizes both contact and proximity. Connects directly to a USB port. The PhidgetCircularTouch detects changes in the capacitance between the on-board electrodes and the object making contact. The side of the circuit...

Replaced by HUB0002_0 The HUB0001 is a drop-in replacement for the HUB0000, supported by Phidget22 version 1.8 or newer. HUB0001 will enable data rate increases of up to 10x for future generations of VINT devices. The VINT Hub is one of...

Replaced by MOT0110_0 Note: The 1044_1B uses a different chipset as the 1044_0B, so performance may vary slightly. The PhidgetSpatial Precision 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis...

Read up to four thermocouples via USB with this board to measure the temperature of four different objects. Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors. J, K, E and T...

Measure up to 2 load cells or Wheatstone Bridge-based sensors with this input module. Connects to a VINT port. Bridge-based sensors are are a common type of resistive sensor that produce a very small voltage drop. Load cells, strain...

Reads one 4-20mA, frequency output, PNP/NPN or 5V sensor, and provides 12 or 24V without an external supply. Most of the sensors sold at Phidgets are simple 0-5V devices that can be read directly from a VINT port (See the Connection &...

Measure sound from 34 to 102 dB (SPL). Supports A and C weightings, and can split data into distinct frequency bands. Measure sound pressure level of a room or an environment with this neat little Phidget that plugs into a VINT port (See...

This voltage sensor measures ±30V DC and connects to an Analog Input or VINT Hub port. The Voltage Sensor measures the differential voltage between the input terminals and outputs the difference proportionally. The maximum differential...

This inexpensive temperature sensor measures the ambient air temperature surrounding the board. Temperature sensor with a range of -30°C to +80°C with a typical error of ±0.75°C in the 0°C to 80°C range. The temperature sensor component...