Products from NCD

The OET is an Ethernet Adapter board For Onion Omega which works with Onion Omega 2 and Onion Omega 1. This Onion Omega Ethernet adapter provides an Ethernet Expansion for the Onion Omega 1 & 2. Using the Ethernet port you can control...

The ESP8266 makes it easy to use the Arduino IDE and the Arduino Wire Language for IoT applications. To program the ESP8266 module press GPIO0 and RST button together and leave the RST button first and then release the GPIO0 button. By...

NCD test all of their products using the BRIDGEX5, which they are now making available to their customers to connect them to a world of sensors and controllers of all kinds. They custom-engineered the BRIDGEX5 for the sole purpose of...

This adapter was designed to connect the Pycom WiPy2/LoPy WiFi module to any of our NCD IoT devices. This adapter includes a Level-Shifted I2C Communication Bus and a USB interface for programming the WiPy. This adapter is compatible...

This RFID Receiver for Arduino Nano makes it easy to interface RFID cards, fobs, tags, and stickers into your next automation application. Simply swipe a RFID device across the sensor and read the code into the Arduino Nano at 9600 baud...

The AN adapter was designed to allow the Arduino Nano to directly plug into NCD IoT Devices. This adapter remaps the I2C and power connections only, and should not be used for applications outside the NCD product line. Dual row headers...

This RFID Receiver for Arduino Micro makes it easy to interface RFID cards, fobs, tags, and stickers into your next automation application. Simply swipe a RFID device across the sensor and read the code into the Arduino Micro at 9600...

The AM adapter was designed to allow the Arduino Micro to fit in the Particle Electron socket of all NCD devices. This adapter remaps the I2C and power connections only, and should not be used for applications outside the NCD product...

The ADUE is a +5V Dual I2C Expansion Shield for the Arduino Due. This shield acts as a gateway to the entire NCD I2C product line, allowing limitless expansion possibilities. This shield could be the single most significant shield for...

This ESP8266 host adapter was designed specifically for the Adafruit Huzzah version of the ESP8266, allowing I2C interface to our entire NCD product line. Integrated USB port supplies power and programming to the ESP8266. The ESP8266 is...

This ESP8266 device adapter was designed specifically for the Adafruit Huzzah version of the ESP8266, allowing easy plug-in to NCD Host Devices. Integrated USB port allows easy programming of the ESP8266. The ESP8266 is an incredible...

This 8-Channel power FET driver allows 8-bit proportional control of high-current loads using I2C communications, making it compatible with all computing platforms, including Raspberry Pi, Arduino, Particle Photon, BeagleBone, and much...