Top seller
No results were found for the filter!
The MPXV7007DP sensor is shaped so two small tubes can be attached to it, simplifying its practical application. This makes this Click board™ an ideal solution for monitoring the pressure in different kinds of HVAC applications, hospital...
₹ 2,839.00 *
DO NOT TOUCH THE BOARD WHILE THE EXTERNAL POWER SUPPLY IS ON! Note : Voltage higher than 50V can be hazardous! The click is to be used by trained personnel only and attention when applying high voltage is strongly adviced. Due to the...
₹ 1,889.00 *
Temp&Hum 10 click can measure the humidity in the range from 0 to 100 %RH and temperature in the range from -30 °C to +100 °C, with the typical accuracy of ±3 %RH and ±0.4 ?. It consumes small amounts of power while in operation,...
₹ 1,679.00 *
Features such as the embedded self-test, support for the hard iron compensation, selectable power mode, 16-bit data output, a wide dynamic range of the measurement (±50 gauss), make this Click board™ a perfect choice for various IoT...
₹ 1,579.00 *
MPR series sensors offer many benefits, making them ideally suited to be used on many different application designs. By featuring the MPRLS0025PA00001A absolute pressure sensor, Pressure 8 click is the perfect tool for development of...
₹ 2,629.00 *
Note: ECG 4 is a development and prototyping tool. It is not intended to be used for medical treatment of patients and other life-critical applications! The BMD101 SoC integrates all the necessary components, so there are very few...
₹ 3,679.00 *
The ACS733 has a precisely trimmed analog output, which changes linearly with the applied current. Its excellent galvanic isolation simplifies the application, allowing the Click board™ to be connected directly to the measured circuit....
₹ 1,889.00 *
The pressure sensor contains protective gel, preventing water or humidity to damage the circuit. Additionally, it is protected from overpressure, allowing it to withstand pressure peaks up to 20x its measurement range. These features...
₹ 2,519.00 *
Features such as low power consumption, high precision of motion detection, high shock tolerance up to 20,000 g, a programmable full-scale range for increased accuracy, allow 6DOF IMU 4 click to be used for development of different types...
₹ 1,679.00 *
The Click board™ is equipped with all the necessary elements, required to provide a reliable operation: it has a varistor across the relay output contacts, preventing excessive voltage transients, it has a flyback diode for the backEMF...
₹ 1,579.00 *
The DPS422 is designed with the low-power consumption in mind, has a very small size, and requires a low number of external components. These features make the DPS422 a perfect choice for an IoT or battery-powered application. Therefore,...
₹ 1,579.00 *
With its ability to accommodate to different light conditions especially behind a dark glass, the ADPS9930 represents an ideal solution for dimming TFT and LCD displays on various devices. Positioned behind a semi-transparent bezel, it...
₹ 1,469.00 *
IR Sense 2 TMR Angle Click IrDA 3 click Light click GSR click 13DOF Click Alcohol click HDC1000 click Thermo J click Proximity 8 Grid-EYE click EMG click 9DOF click 3D Hall 6 Click Gyro 2 Click Vibra sense IR Sense 3 Tilt click Pressure 3 Opto Encoder 2 Hall Current 4 Gyro 4 Click RTD click Color 6 click 6DOF IMU 2 Force click 6DOF IMU click Opto Encoder Accel 12 click Heart Rate 3 Water Detect GeoMagnetic Pedometer 3 Angle 4 click Environment MOTION click Air quality ECG EMG sensors DHT22 2 click 6DOF IMU 11 MPU IMU click Slider click UV2 click GYRO click 3D Motion click Heart Rate 7
Viewed