Color 3 click

TCS3771 is a RGBC sensor: it can detect Red, Green, Blue and clear light. The IC performs well under a variety of lighting conditions. For example, it can be covered with different attenuation materials.

As a proximity sensor it has a large dynamic range of operation. It can take short distance measurements behind dark glass; or it can be configured for longer distance measurement, for example, human presence detection in front of monitors or laptops.

For power-saving, TCS3771 has an internal state machine that can put the device into a low power mode between successive RGBC and proximity measurements.

TCS3771 is also fast enough to give off proximity information at a high rate of repetition. This makes it useful for proximity detection in portable devices (such as a phone coming near to a speaker’s ear).

Color 3 click communicates with the target MCU through the mikroBUS™ I2C interface, with additional functionality provided by an INT pin. Designed to use a 3.3 power supply only.

Specification

Programming

The following code snippet shows how to send temperature readings from Color 3 click to a TFT display.

 1 void main()
2 {
3     //Local Declarations
4     uint8_t _i2c_address = 0x29;
5     color_t my_color;
6
7 	// GPIOs
8     GPIO_Digital_Input( &GPIOD_BASE, _GPIO_PINMASK_10 );
9     Delay_ms(300);
10
11      // I2C
12     I2C1_Init_Advanced( 100000, &_GPIO_MODULE_I2C1_PB67 );
13     Delay_ms(300);
14
15     //Color 3
16     color_3_init( _i2c_address );
17     Delay_ms(300);
18
19     color_3_get_rgb_data( &my_color );
20
21     while(1)
22     {
23
24     }
25 }

Code examples that demonstrate the usage of Color 3 click with MikroElektronika hardware, written for mikroC for ARM, AVR, dsPIC, FT90x, PIC and PIC32 are available on Libstock