Top seller
No results were found for the filter!
1-pin MTE Cable (5-pack) Features 6" in length Can be used with any Digilent board Ideal for testing and verification Ships in pack of 5
₹ 579.00 *
60W PCIe 12V 5A Power Supply (Add IEC Cable for... This 12V 5A AC/DC adapter is the perfect solution for powering your Digilent NetFPGA-1G-CML board. With the PCIe output connector, you can use this power supply with other devices that use PCIe power connectors. Note: Not recommended for...
₹ 5,039.00 *
DMM Probes: Digital Multimeter Test Leads This set includes one black multimeter probe and one red multimeter probe. These test leads are terminated in 0.079 inch (2 mm) diameter probes that are 0.709 inch (18 mm) in length. Each cable has a total length of 29.53 inch (750 mm)...
₹ 1,029.00 *
IR Range Sensor The IR Range Sensor is a great way to add range detection to robotic projects that use Cerebot™ boards. The sensor detects reflective objects 10 to 80 cm away. The sensor connects to the ADC found on all Cerebot boards. The cable maps...
₹ 1,949.00 *
Project Box + Sticker Sheet Add-on If you're like us, your desk is covered in lots of irreplaceable little treasures: Logic boards, wires, electrical components, motors, etc. Now there's finally a way to gather some of it up and take it with you! This project box is the...
₹ 799.00 *
Standoffs This pack of standoffs will enable you to attach your circuit board to another surface, proudly display your project with a glamorous lift, or even stack your assembly in organized layers! Features: Contains: 4 hexagonal standoffs (6-32...
₹ 169.00 *
Thermocouple Wire: 1 Meter At 1 meter long, this K-Type thermocouple wire allows you to safely and accurately measure the temperature of objects that you do not want the rest of your circuitry getting close to. The duplex insulation ensures that no unintended...
₹ 1,149.00 *
DC Motor - 150 RPM Geared motors for robotics applications. Very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel. Features 100 RPM 12V DC motors with...
₹ 279.00 *
30-pin Flywire Labels for the OpenScope MZ This sticker sheet provides 30 plastic labels for the 30 pins on the OpenScope MZ flywires . Based on the popularity of the Analog Discovery 2 Flywire Labels, we decided to create a similar sticker sheet for the OpenScope MZ. Just remove...
₹ 229.00 *
VHDCI Male-to-Male Cable Features: VHDCI male connector on both ends 16" in length Useful for connecting Vmods to VHDCI-equipped system boards (Genesys, Atlys, etc.)
₹ 3,449.00 *
FX2 Module Interface Board The Digilent FX2 Module Interface Board (FX2 MIB) offers a ready-made solution for interfacing peripheral modules to Digilent system boards. Stats: Connector(s): Hirose FX2 Four 12-pin Pmod Two 6-pin Pmod Features: Provides 6 additional...
₹ 3,449.00 *
Hirose FX2 Socket Connector This 100-pin socket allows users to build their own boards that interface with the Hirose FX2 expansion connector included on several of our system boards, including the Nexys, Nexys 2, Virtex ® -II Pro, and Spartan ® -3E Starter Board....
₹ 1,719.00 *
High Current 5V 2.5A Digilent Analog Analog Embedded Vision 4-pin to 30-pin Flywire Motor Shield Speaker DMM Probes 3.3V PowerBRICK Analog Parts 1-pin MTE Cable 30-Pin Flywire USB A to Mini-B Analog XUP Fly Wire Project Box 2x6 Pin Header Hirose FX2 2x15 Flywires Analog Coax Power Shield Adapter Solderless NI Multisim High Speed PowerBRICKS USB to Serial OpenScope MZ Digital Digilent VHDCI Breadboard IR Proximity 9V PowerBRICK 60W PCIe 12V 5A Heatsink with BNC to Analog Analog Analog Mini Grabber OpenScope MZ 4-pin MTE Cable
Viewed