Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
 
606 From 632
No results were found for the filter!
Reach M+ Antenna Extention Cable 2M
Reach M+ Antenna Extention Cable 2M
Reach M+ Antenna Extention Cable 2M Compatible with the original Reach module.
₹ 1,549.00 *
Reach M+ TNC Antenna Adapter Cable 2M
Reach M+ TNC Antenna Adapter Cable 2M
Reach M+ TNC Antenna Adapter Cable 2M Compatible with the original Reach module.
₹ 1,809.00 *
Tallysman Multi-GNSS Antenna
Tallysman Multi-GNSS Antenna
Tallysman TW4721 is a compact, wideband Accutenna™ technology GNSS antenna that provides accurate reception for all upper L- band GPS, GLONASS, Beidou, and Galileo signals (L1, G1, B1, B1 BOC, B12, E1) and associated augmentation signals...
₹ 7,739.00 *
Navio2 GPS/GNSS Antenna MCX
Navio2 GPS/GNSS Antenna MCX
This antenna is not compatible with NEO6-T USB dongle. Antenna type: active (LNA built-in) Supported navigation satellite systems: GPS, GLONASS Dimensions: 45 x 35 x 15 mm Cable length: 300 mm Connector type: MCX Mounting: adhesive...
₹ 1,549.00 *
Power Module For Navio2
Power Module For Navio2
Supports LiPo batteries up to 6S Max current sensing: 60 A* Switching regulator output: 5.3 V 2.25 A 6-pos DF13 cable for connection to Navio2 power port *power module can sense current up to 90A if different connectors are used (XT60...
₹ 2,069.00 *
Wire Pack For Navio2
Wire Pack For Navio2
Includes : 2xDF13 6-pin to 2.54 mm female jumpers for UART and ADC ports 1xDF13 4-pin to 2.54 mm female jumpers for I2C port Wire length: 200 mm.
₹ 1,159.00 *
TCA9548A I2C Multiplexer
TCA9548A I2C Multiplexer
You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh, this chip has a fixed I2C address, and from what I know about I2C, you cannot have two devices with the...
₹ 769.00 *
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121
Adafruit Capacitive Touch HAT for Raspberry Pi...
This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes....
₹ 1,649.00 *
Teensy-LC without Pins
Teensy-LC without Pins
Teensy-LC (Low Cost) is a powerful 32 bit microcontroller board, with a rich set of hardware peripherals, at a very affordable price! Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler....
₹ 1,809.00 *
Adalight - DIY Ambient Monitor Lighting Project Pack
Adalight - DIY Ambient Monitor Lighting Project...
Build your own ambient-light addition for a monitor or media PC television with the Adalight project pack! This project pack is for our " Adalight" project tutorial . By running the Processing code on your computer, the halo of LEDs will...
₹ 5,489.00 *
Heart Rate Educational Starter Pack with Polar Wireless Sensors
Heart Rate Educational Starter Pack with Polar...
Read wireless heart-rate data into your electronics projects in under 10 minutes with this educational experimentation kit for Polar wireless heart rate bands. This pack is designed for students, hobbyists, engineers and artists who want...
₹ 7,149.00 *
Adafruit Trinket - Mini Microcontroller - 5V Logic
Adafruit Trinket - Mini Microcontroller - 5V Logic
Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into...
₹ 769.00 *
606 From 632
Viewed