Features 1024×600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own...

Key Parameters LCD Type TFT Interface RGB/LVDS Touch Controller FT5406 Touch Panel Type Capacitive (5 multi-touch) Backlight LED Display Size (mm) 222.72(W)×125.28(H) Dot Pitch (mm) 0.2175(W)×0.2088(H) Aspect Ratio 16 : 9 Resolution 1024...

10 DOF IMU Sensor (C), Inertial Measurement Unit, Lower Power Consumption. 10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own...

This is a colorful display module designed for the BBC micro:bit, 1.8inch diagonal, 160x128 pixels, capable of displaying 65K colors. Tired of the 5x5 LED matrix? Time to get a tiny monitor for your micro:bit, this one would be the ideal...

This is the SparkFun MiniGen Signal Generator, a small shield for the Arduino Pro Mini that is capable of generating sine, square, or triangle waves at up to 3MHz, and approximately 1Vp-p. Though the MiniGen is technically a shield it...

The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to create a tiny, reprogrammable, multipurpose IMU (Inertial Measurement Unit). It can be programmed to monitor and log...

TMDSDOCK28379D is a HSEC180 controlCARD based evaluation and development tool for the C2000™ Delfino™ F2837x series of microcontroller products. The Docking Station provides power to the controlCARD and has a bread-board area for...

Features 8 megapixel IMX179 sensor 3288x2512 resolution USB interface, UVC protocol, driver-free, plug-and-play DSP Automatic white balance (AWB) Automatic exposure (AEC) Automatic gain control (AGC) Camera specifications CCD size:...

The SimpleLink™ Bluetooth® low energy CC2650 Module BoosterPack plug-in module is the quick and easy way to add Bluetooth low energy to your LaunchPad™ development kit. Simply plug the CC2650 module BoosterPack kit into the MSP432™...

The CC2640R2F device has the first fully qualified Bluetooth 5 protocol stack for single-mode Bluetooth low energy applications supporting high speed mode. CC2640R2F is part of the SimpleLink™ microcontroller (MCU) platform which...

The new SensorTag IoT kit invites you to realize your cloud-connected product idea. The new SensorTag now includes 10 low-power MEMS sensors in a tiny red package. And it is expandable with DevPacks to make it easy to add your own...

The CC3200MODLAUNCHXL is a low-cost evaluation platform which hosts the CC3200MOD. The SimpleLink™ CC3200MOD is a wireless microcontroller (MCU) module that integrates an ARM® Cortex™-M4 based MCU, allowing customers to develop an entire...