Top seller
No results were found for the filter!
7inch HDMI LCD, 1024×600 Features 1024×600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own...
₹ 6,139.00 *
400x300, 4.2inch E-Ink raw display,... 400x300, 4.2inch E-Ink raw display, yellow/black/white three-color, SPI interface, without PCB. This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports yellow, black,...
₹ 2,579.00 *
400x300, 4.2inch E-Ink raw display, three-color This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide...
₹ 2,579.00 *
4 Port USB HUB HAT for Raspberry Pi This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication. It can work with various versions of the Pi, and the size of the board is...
₹ 889.00 *
200x200, 1.54inch E-Ink raw display panel 200x200, 1.54inch E-Ink raw display, SPI interface, without PCB. This is an E-Ink raw display, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like...
₹ 799.00 *
200x200, 1.54inch E-Ink display module 200x200, 1.54inch E-Ink display module, SPI interface. This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra...
₹ 1,589.00 *
128x32, General 0.91inch OLED display Module This is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface. Features 0.91inch small form factor 128x32 high resolution I2C interface, requires only two signal pins...
₹ 699.00 *
1200x825, 9.7inch E-Ink raw display 1200x825, 9.7inch E-Ink raw display, parallel port, without PCB. This is an E-Ink raw display, 9.7inch, 1200x825 resolution, communicating via parallel port. Due to the advantages like ultra low power consumption, wide viewing angle,...
₹ 13,159.00 *
1200x825, 9.7inch E-Ink display HAT for... 1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface. This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via...
₹ 17,509.00 *
10.1inch HDMI LCD, 1024×600 Features 1024×600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own...
₹ 9,599.00 *
10.1inch Capacitive Touch LCD (D) 1024x600 Key Parameters LCD Type TFT Interface RGB/LVDS Touch Controller FT5406 Touch Panel Type Capacitive (5 multi-touch) Backlight LED Display Size (mm) 222.72(W)×125.28(H) Dot Pitch (mm) 0.2175(W)×0.2088(H) Aspect Ratio 16 : 9 Resolution 1024...
₹ 7,819.00 *
10 DOF IMU Sensor, Low Power 10 DOF IMU Sensor (C), Inertial Measurement Unit, Lower Power Consumption. 10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own...
₹ 2,669.00 *
DIGI POT 3 DIGI POT 5 Nitric Oxide NO 5 1 DOF GainAMP 2 click Charger 5 click RS485 2 click Hall Current 4 EasyPIC v7 for Bargraph OAK-D-Lite External LTE Carrier board MSP430FR2433 1000 1 Micro Opto 2 click UART I2C SPI EasyMx PRO v7 UART 1-Wire Buck-Boost 3 4-20 mA T click iButton click 1-Channel DC NVIDIA Jetson CT220RMV-HS5 Rotary 1-Wire I2C NFC Extend LLC-I2C Click BarGraph 2 Pimoroni Adafruit ATA6570 click Google Coral 9v battery Developer kit CAN Isolator DALI 2 click 4-20 mA R click Google Coral USB UART 2 MUX click RS485 Isolator AMS5812-0015-D CT220BMV-HS5 Expand 4 click
Viewed