Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
 
363 From 633
No results were found for the filter!
AlphaBot, Basic robot building kit for Arduino
AlphaBot, Basic robot building kit for Arduino
Basic robot building kit for Arduino: UNO PLUS + AlphaBot + Ultrasonic Sensor. This kit comes with controller board UNO PLUS, AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and ultrasonic...
₹ 8,899.00 *
7inch Resistive Touch LCD 800x480
7inch Resistive Touch LCD 800x480
Key Parameters LCD Type TFT LCD Interface 24-bit parallel Touch Screen Interface 4 wires, resistive Backlight LED Display Size (mm) 154.08 (W) × 85.92 (H) Dot Pitch (mm) 0.0642 (W) × 0.1790 (H) Aspect Ratio 8 : 5 Resolution 800 * 480...
₹ 4,849.00 *
7inch HDMI LCD, 1024×600
7inch HDMI LCD, 1024×600
Features 1024×600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own...
₹ 6,139.00 *
400x300, 4.2inch E-Ink raw display, yellow/black/white three-color
400x300, 4.2inch E-Ink raw display,...
400x300, 4.2inch E-Ink raw display, yellow/black/white three-color, SPI interface, without PCB. This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports yellow, black,...
₹ 2,579.00 *
400x300, 4.2inch E-Ink raw display, three-color
400x300, 4.2inch E-Ink raw display, three-color
This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide...
₹ 2,579.00 *
4 Port USB HUB HAT for Raspberry Pi
4 Port USB HUB HAT for Raspberry Pi
This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication. It can work with various versions of the Pi, and the size of the board is...
₹ 889.00 *
200x200, 1.54inch E-Ink raw display panel
200x200, 1.54inch E-Ink raw display panel
200x200, 1.54inch E-Ink raw display, SPI interface, without PCB. This is an E-Ink raw display, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like...
₹ 799.00 *
200x200, 1.54inch E-Ink display module
200x200, 1.54inch E-Ink display module
200x200, 1.54inch E-Ink display module, SPI interface. This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra...
₹ 1,589.00 *
128x32, General 0.91inch OLED display Module
128x32, General 0.91inch OLED display Module
This is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface. Features 0.91inch small form factor 128x32 high resolution I2C interface, requires only two signal pins...
₹ 699.00 *
1200x825, 9.7inch E-Ink raw display
1200x825, 9.7inch E-Ink raw display
1200x825, 9.7inch E-Ink raw display, parallel port, without PCB. This is an E-Ink raw display, 9.7inch, 1200x825 resolution, communicating via parallel port. Due to the advantages like ultra low power consumption, wide viewing angle,...
₹ 13,159.00 *
1200x825, 9.7inch E-Ink display HAT for Raspberry Pi
1200x825, 9.7inch E-Ink display HAT for...
1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface. This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via...
₹ 17,509.00 *
10.1inch HDMI LCD, 1024×600
10.1inch HDMI LCD, 1024×600
Features 1024×600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own...
₹ 9,599.00 *
363 From 633
Viewed